Controller Test Bar
 
Notifications
Clear all

Controller Test Bar

13 Posts
9 Users
0 Reactions
5,661 Views
blurp
Posts: 279
Topic starter
(@blurp)
Reputable Member
Joined: 19 years ago
[#17430]

Here's my new 24-channel controller test bar. I got sick of having to gather up strings of lights every time I needed to test a controller. 24 night lights, 24 sheetrock screws, and a stick. Now I can just grab the female pigtails from the controller and slap them on the nightlights quickly.

P1020320
P1020321

12 Replies
FIRECOP252
Posts: 1292
(@firecop252)
Noble Member
Joined: 16 years ago

Good Idea....might have to consider doing something like that myself...thanks for sharing


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Terrific idea!


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago

I had a similar approach for an 8-channel controller although I wasn't testing the controller so much as I was testing some code I wrote.

I wanted something easy/simple that wasn't a whole string of lights and took up too much room. Now I have the entire thing in a 99¢ pencil box from staples.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

Blurp,
Fantastic idea! I like the route you took. I may have to make me one of those.

Materdaddy wrote:I had a similar approach for an 8-channel controller although I wasn't testing the controller so much as I was testing some code I wrote.

I wanted something easy/simple that wasn't a whole string of lights and took up too much room. Now I have the entire thing in a 99¢ pencil box from staples.

I followed a similar route. I made it to mount the board so I could work on it some if needed.

testboard

Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago
Wayne J wrote:Blurp,
Fantastic idea! I like the route you took. I may have to make me one of those.

I followed a similar route. I made it to mount the board so I could work on it some if needed.

I like all of these ideas using spare/old parts!

Wayne, I especially like the stand-offs you have to mount the PCB.


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

Now if ONLY there was some sort of inexpensive solid state indicator that we could build on board that could indicate a channel is active. It would need to be some sort of light emitting device of some sort- maybe even a diode type thing. Too bad there is not anything we could use like that on controller designs...

:devilred:

BTW Matterdaddy, your video is giving me a Chumby... :shy:


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
CaptKirk wrote:Now if ONLY there was some sort of inexpensive solid state indicator that we could build on board that could indicate a channel is active. It would need to be some sort of light emitting device of some sort- maybe even a diode type thing. Too bad there is not anything we could use like that on controller designs...

:devilred:

BTW Matterdaddy, your video is giving me a Chumby... :shy:

gee - subtle... Only issue is that the LED does not tell you that the TRIAC is working which is really the important thing to test...


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

Brian, when I have I ever been subtle! :sly: And I grant you the actual output is not tested but channel indicators sure go a LONG way to being able to SEE the health of a board, even if just the logic and not the true output. Besides it is ANOTHER blinky/flashy show on your board! We don't need more cowbell, we need more LED!!


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

Capt'n is dreaming of the good olde days with the OLSEN 595 boards. 😎

You could of course upgrade to RPMs 16Ch AC controller. They have LEDs in series with the optos.:razz:


Reply
Page 1 / 2
Share: