xlights bug?
 
Notifications
Clear all

xlights bug?

16 Posts
5 Users
0 Reactions
4,132 Views
Posts: 19
Topic starter
(@gsrunion)
Eminent Member
Joined: 11 years ago
[#44016]

I discovered Xlights yesterday and was thrilled that it ran on OSX and at the ease of building custom models (building a model for my ChromaFlakes in Vixen was extremely tedious).

One question, and it may be a bug or I may be me doing something wrong. I was working on building a sequence for Christmas in Sarajevo and imported the timings for the song provided with xlights. All the marks show up fine and dropping an effect on the editor snaps to the most recent timing mark as desired.

However, the endpoint of the effect doesn't snap to any timing mark and spans the length of the entire track and has to manually resized. Is this supposed to work that way? Is there a workaround to make resizing the effect easier?


15 Replies
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

Should just go between timing marks. Are you sure you don't just have one timing.

There is a great XLights 4 Webinar series on youtube.


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago

post a screenshot of what you are referring to


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

You've got a lot to learn. Timing marks are only there to aid in dropping effects but to be honest I rarely use them. If you turn off the timing tracks you can freehand drop effects and they default to 1 second and then you can drag the edges wherever you want them. If you create timing marks and drop effects they will drop with the duration of the timing effect you are dropping them in. Once dropped effects are not associated with timing marks so the edges are free to be dragged anywhere you want.


Reply
Posts: 19
Topic starter
(@gsrunion)
Eminent Member
Joined: 11 years ago
capture

As you can see there are plenty of timing marks but the highlighted effect goes on forever when dropped. The other effects below were manually resized and do snap to the timing marks when being resized. It is just the original drop that doesn't seem to respect the next timing mark.


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago

are you dropping the effect or using copy/paste? If you are pasting, make sure you have 'paste by cell' selected and not 'paste by time' up in the toolbar


Reply
Posts: 19
Topic starter
(@gsrunion)
Eminent Member
Joined: 11 years ago
didjareally wrote:are you dropping the effect or using copy/paste? If you are pasting, make sure you have 'paste by cell' selected and not 'paste by time' up in the toolbar

Dropping. Copying and pasting and already relatively sized item seems to work the way would expect. I recorded a short screencast showing the behavior....trying to figure out how to upload....


Reply
Posts: 19
Topic starter
(@gsrunion)
Eminent Member
Joined: 11 years ago

I uploaded the video to youtube....

I watched several videos on dropping effects and I don't recall seeing it behave this way there.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

There is a way to cause that behavior but I'd need to see your sequence file along with the xlights_rgbeffects.xml file. Could be an invalid timing mark.


Reply
Posts: 141
(@jspiker77)
Estimable Member
Joined: 11 years ago

These are invalid timing marks, try doing a save and see if it cleans up. If not just readd the timing mark by clicking in the timing bar and hitting t on your keyboard.


Reply
Page 1 / 2
Share: