You have several options to create a model of a front door. You can use several straight lines, you can use the 'polyline', you can use a 'window', or you could create a 'custom model'.
Using one outlet on my F16, benefits of each of the choices?
PolyLine was made to do that. I used it for my garage door outlines. The main thing is leave the controller start location on the left and just draw the PolyLine starting from wherever it really physically starts. Like don't draw it starting on the left side of the door and then try to tell the program the controller is on the right. Just draw it from right to left. It doesn't work the other way around once you include it in a group. I was trying to fix the right start location but thinking about it I'd rather just disable the ability to select a different start corner. It should just be drawn in the direction it's wired instead of drawing it one way and trying to flip the start location in the settings.
Gil, I think I get it. My input is lower right, My counts are right side 31, top 14 and left 30. total of 75 pixels. 3 polylines or 1 for the door?
You did not just ask me whether you should draw 3 PolyLine's as straight lines to create a door...lol.
nope. I was using my feeble mind reverting to drawing polylines in AutoCad. So draw one polyline starting at lower right up to the top over to the left and down to the bottom. 75 pixels. How does Xlights know I have 31-14-30 or does it matter?
