universe/channel re...
 
Notifications
Clear all

universe/channel renumbering

15 Posts
4 Users
0 Reactions
4,744 Views
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago
[#41900]

HI . i have add new elements and have renumbered universe and channels counts in the setup.
That has worked fine, upon loading an older sequence the preview runs smoothly and all is good,
the problem is i have two previews of my setup now on the one preview screen
A smaller older version in the middle of the screen- two of everything.(but not the new elements)
1 How do i remove this second smaller preview.
2 How do i reassign universes to the individual elements ie tune to sign was uni 50 now its Uni5.
But all the elements still show the older universe allocation when you pass the cursor over each element in the layout tab
and the info popup show the elements universe and channel mapping.
Cheers Boof63
PS it did crash when trying to run this the first time.


14 Replies
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

the small one is probably your whole house or a model group. just go to the all view and select what you want to be hidden and assign it to Unassigned. Unassigned is the same as turning off the "My Display" lag from older versions of xlights. As of 2016.38 "My Display" was removed from models. Now you assign a model or model group to a view.


Reply
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago

As always Sean, thanks for your help,
it was the WHM coming through as well
Cheers and thanks
Boof63


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

One other note: if you had 50 models and maybe arches1-11 all in your show. U have put all models into a whole house model. If u decide to move arch11. To unassigned some people get confused why it still shows when looking at the default view? The reason is arch11 might be in unassigned view but arch11 us also in WHM. Remove arch11 from whm and it will then disappear from the default view.

Sent from my iPhone using Tapatalk


Reply
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago

thanks Sean, that has solved question one, now for question two.

10 07 2016 055 sml

10 07 2016 056 sml

10 07 2016 057 sml

I have reset the setup universe /channel count,
How do i reassociate my new setup with the existing elements.
As you can see the 1st and 3rd bells have the same universe, while the 2nd bell has different univerese.
HOw do i reset these associations so that i can programme my controllers correctly
ie all my bells will now be on universe 2 for 2016 not 3 or 6.
or have i stuffed up monumentally
cheers Boof63


Reply
Page 1 / 3
Share: