problem with WHM
 
Notifications
Clear all

problem with WHM

7 Posts
4 Users
0 Reactions
2,734 Views
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago
[#34784]

when i am using an effect with the whole house model for a part in the sequence.
the WHM will not release control of the lights associated with it.
i have tried none,none and color wash black,black to disengage the whm to no avail

please advise


6 Replies
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago

any thoughts?


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago

does this not happen to anyone else?


Reply
cnbales
Posts: 503
(@cnbales)
Honorable Member
Joined: 15 years ago

It has happened to me and it was unresolved. I used the WHM mostly for my sequencing and then at times had other single models in while the WHM was selected to none, none. I had the same problem as you. When one model was going and that model ended in would not revert back to the next model in the next time slot. The only way that I fixed it was to get rid of all models other than WHM in my sequence. I chose to do it this way because most of my sequencing was done in WHM and I could live without the few other effects I made in models with just one element.


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago
cnbales wrote:It has happened to me and it was unresolved. I used the WHM mostly for my sequencing and then at times had other single models in while the WHM was selected to none, none. I had the same problem as you. When one model was going and that model ended in would not revert back to the next model in the next time slot. The only way that I fixed it was to get rid of all models other than WHM in my sequence. I chose to do it this way because most of my sequencing was done in WHM and I could live without the few other effects I made in models with just one element.

thank you for your reply.
i cant do that though. i have several "effects" that are specific to each model not the WHM. there is however a few parts in the sequence that i wanted to use the WHM. i may have to dump the WHM if i cant get it to release when it supposed to.
heck i may have to revert back to a release before the WHM this may be a bug or something.


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

i have not seen this, but i still dont have a show yet so i am focused on getting final lights up and then start sequencing. i am only using a whole house model so i wouldnt see it.

dave pitts is also only using a whole house model in his show.
any others who have models and a whm having issues?


Reply
Posts: 353
(@bigredsoftware)
Reputable Member
Joined: 15 years ago

I ran into this. Add another row after the effect. Make everything none, then add a row after that, make WHM off, then one more row, mask WHM none. Don't ask me why. Good luck.


Reply
Share: