Nutcracker: first l...
 
Notifications
Clear all

Nutcracker: first light

12 Posts
8 Users
0 Reactions
8,461 Views
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago
[#19372]

I normally only come to this forum: "How do I?", i searched and found some discussion about Nutcracker in other places here on DIYC.

One of them shows that someone has used Nutcracker and Emmanuels tools and got his tree to light up.

I have been waiting for someone to show that the Nutcracker to Vixen works and we see it. Yeah!

http://doityourselfchristmas.com/forums/showthread.php?20178-My-Pixel-Tree-The-Beginnings-(The-edited-version)

Henedce wrote:Been working the last few weeks to bring my pixel Mega Tree or half tree to life .

My Concept:
I wanted a way that I could mount my pixels at even intervals along the full 5.5 mtrs (18ft), but I also wanted to be able to rotate each upright to any angle as well as be able to tilt them out or in at will to increase or decrease the circumference of my base.
I have spent the 1-2 months or so reading others posts, costing supplies and asking questions. I discarded multiple ideas before finally settling on this

Next step was to build the frame. I originally went with a frame I could build at ground level , set up then lift into place. Bad idea the weight makes it too unstable to lift . So I went to a more traditional mast plus carriage to winch the lights into place. The sheer enormity of this project started to come to light.

Then spent yesterday finalising the carriage head, attaching 6 strings to conduit, spending 2 hours trying to nut out a communication issue with my P12 and then another hour nutting out why the lights wouldn't work.

Communication issue seemed to be a 30 metre solid core cable although testing fine with my tester just refused to work but 2 15 metre store bought worked with my router/modem in between.

Lights not working was simply the strings I bought changed their wiring pattern randomly depending where you cut them.

But here it is. Only 6 strings atm as thats all I have until my budget allows me to buy more. Sequencing was done using Nutcracker (Awesome software) and Emmanuel's Addins.

list: UUbcH2uH27u4rBn63opFisvQ

I think you are the first person to show a nutcracker sequence! I have been waiting to verify it is all working.

thanks

PS: Emmanuels tools are here for Vixen. www.emmanuelmiranda.info


11 Replies
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago

Another user has a video using Nutcracker effects

Originally Posted by jaywalk101
Hey Sean,

Check out my Mega Tree I did using your Nutcracker software. Thanks for all your help!


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

Wow, that 10' pixel tree is cool. If Jaywalker101 raised the center pole by 3-4 feet, and using the same length strings, but reduce the diameter and attach then to a hanging PVC sircle, that would be way cooler!!

Here is what I mean by a hanging circle of PVC:

mega

Reply
jaywalk101
Posts: 761
(@jaywalk101)
Prominent Member
Joined: 15 years ago

yeah.... I definitely want to get the tree a little taller and use some PVC as the base... I just wanted a quick way to get this up and running to see what it looks like (seeing if my 400 dollars on pixels was well spent... 🙂


Reply
n8huntsman
Posts: 562
(@n8huntsman)
Honorable Member
Joined: 16 years ago

Since there are more threads regarding nutcracker than there are for the Arduino, and arduino has it's own forum, maybe Nutcracker should also have its own forum too? I pose this because most of the threads are in the Vixen forum when very few are actually related to Vixen.


Reply
Page 1 / 3
Share: