Multiple display el...
 
Notifications
Clear all

Multiple display elements in Xlights

11 Posts
4 Users
0 Reactions
4,059 Views
Posts: 238
Topic starter
(@ronp5683)
Reputable Member
Joined: 14 years ago
[#25637]

Has anyone done multiple display elements in xlights. I can drive my four elements (150 channels each) from the test and with a display element that contains all 600 channels. But if I want to make separate effects with all four display elements, it always plays to the first element.

Thanks


10 Replies
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

if you have 4 display elements on a song, you select the first cell of efffect one, you get that column of effects. if you select 2nd display element and pick first cell, press play you get that display element and not teh others.

This is how Matt created the playback with preview to work.

If you save the 4 display elements as an xseq file and put this xseq file into a schedule to play it. all 4 display elements will be driven. If you export the xseq to LOR,Vixen,LSP or Vixen. All 4 display elements will be in the export.

In other words, only the preview has the limit of only displaying one elment at a time. This was because , currently, we have only one display window.

thanks


Reply
Posts: 238
Topic starter
(@ronp5683)
Reputable Member
Joined: 14 years ago

I think that I have setup xlights in a way that is not expected by the programmers. I defined the output universes, selected working directory and started setting up the effects.

My problem is the channel mapping of the universes to the display objects. Because this does not exist, I think it does not display correctly. I have looked through your lists of tutorials, and don't see one that applies. I also, can not find where to specify the mapping in the software.

Thanks


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

tell what hardware you have and how you are creating your rgb device. ill help


Reply
Posts: 238
Topic starter
(@ronp5683)
Reputable Member
Joined: 14 years ago

Sean,

I have my own hardware.

http://doityourselfchristmas.com/forums/showthread.php?25867-FPGA-based-pixel-controller

I have four trees with 50 each WS2812 pixels on them. My hardware is mapped to universes 36-39, each using the first 150 channels in each universe. The hardware works fine if I output a horizontal matrix with four strings of 150 channels each. So the hardware is working fine. It also works with the test outputs.

So I have four display elements tree50a/b/c/d. How do I map them to the output universes. I can send you the XML files from the test outputs.

Thanks
Ron


Reply
Page 1 / 3
Share: