Sorry if this has been asked/answered before, but when laying out my mega-tree, where should "Strand 1" go in relation to the physical tree? I want to make sure things like doing a 180-degree tree effect work properly.
Thanks!
Are we talking about a Pixel megatree or a standard megatree?
For my standard Megatree I put string 1 in the very front center string. If you are just doing a 180 tree, then I would put string 1 as the left most string.
For a Pixel Tree using Nutcracker, you will want to stick with what Sean has setup. If you are looking at the front of the tree and consider the Center string 6 o'clock, the first string is at 9 o'clock
kychristmas wrote:Are we talking about a Pixel megatree or a standard megatree?For my standard Megatree I put string 1 in the very front center string. If you are just doing a 180 tree, then I would put string 1 as the left most string.
For a Pixel Tree using Nutcracker, you will want to stick with what Sean has setup. If you are looking at the front of the tree and consider the Center string 6 o'clock, the first string is at 9 o'clock
Yep, for a half mega tree if you are looking at the tree from the street, i start at the bottommost left string and wrap left to right.
I'm not sure there is such a thing as a non-pixel MegaTree with Nutcracker?
Anyway, so to be clear, I want "String 1" to start at the 9:00 position from the front of the tree, and then wrap counterclockwise?
tfischer wrote:I'm not sure there is such a thing as a non-pixel MegaTree with Nutcracker?Anyway, so to be clear, I want "String 1" to start at the 9:00 position from the front of the tree, and then wrap counterclockwise?
Sorry, I didn't see where the thread was posted. It didn't seem like a Nutcracker question, but more of a physical layout question.
Yes, the First Pixel is bottom of tree, what I call 9 o'clock position. The next string counter-clockwise is string 2. I believe the start position is the same whether it's a 180 tree or full 360.

