Import Lilia Sequen...
 
Notifications
Clear all

Import Lilia Sequence - problems

11 Posts
3 Users
0 Reactions
3,893 Views
Posts: 144
Topic starter
(@travisb6989)
Estimable Member
Joined: 14 years ago
[#47594]

I purchased and imported one of lilia sequences and all is good until about halfway through the song. At about 1:30 or so my house preview goes dark but there is clearly effects programmed that should be playing. It stays this way until about 2:00. When things start to work again.

I thought maybe it was models/fixtures not mapping correct. However the fixtures that should be on during this time do work doing other portions of the sequence.

See attached screen shot. For example, the side walk arches work for the twinle effect at 1:25, but the single strand and strobe effects at 1:30 to 2:06 don't work. Further along in the sequence at 2:14 there is a color wash effect that then works.

Needless to say I am new xlights and at a loss as to what is causing this.

Thanks

4

10 Replies
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

Render all? Check sequence?


Reply
Posts: 144
Topic starter
(@travisb6989)
Estimable Member
Joined: 14 years ago
keithsw1111 wrote:Render all? Check sequence?

I did all that. There is some warnings in the effects problems section. Not really sure what it means. I couldnt attach a file, so here is some screen shots. Is it possible i have the wrong media file?

10

11

12

13

Reply
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

Those warnings are harmless.


Reply
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

You may have to pm the sequence to me so I can look at it. Please don't post it publicly


Reply
Posts: 144
Topic starter
(@travisb6989)
Estimable Member
Joined: 14 years ago
keithsw1111 wrote:You may have to pm the sequence to me so I can look at it. Please don't post it publicly

Keith, I sent you a PM twice as when I do it. it looks like it doesn't actually send because it does not appear in my sent folder. Let me know if you don't get anything. Thanks!


Reply
kk6ou
Posts: 108
(@kk6ou)
Estimable Member
Joined: 10 years ago

I had this happen on a couple of her sequences. On sections where it goes dark, check the layer blending. If it has anything like "Layer 2 is mask" or anything but Normal change the drop down to "Normal" and see if that fixes the issue. I went through the entire sequence and changed them and all worked after that. For some reason it seems to work on her layout but wouldn't work on mine. Changing it didn't hurt the effects.


Reply
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

If that is the case try turning off model blending in the sequence settings.


Reply
Posts: 144
Topic starter
(@travisb6989)
Estimable Member
Joined: 14 years ago

I will give this a try. Thanks.


Reply
Posts: 144
Topic starter
(@travisb6989)
Estimable Member
Joined: 14 years ago

This seems to have done the trick.

One odd thing as well is that if i open her sequence and change the directory to that folder. Everything opens fine. But i cannot see the house preview when playing a sequence. It shows on the layout tab though.

I have looked for a really small window that may be opening like the effects one does sometimes, however I dont see anything.


Reply
Page 1 / 2
Share: