I'm trying to upload my sequences from Xlights to my Kulp K8-PB with through Xlights FPP connect and when playing back the sequences they are all wrong. The colors and even the props / models in the sequence are wrong.
Looking at the upload it seems the FPP uses the .fseq files but I'm not sure if I selected the correct options for the "FSEQ Type", "UDP Out" and whether or not to click the K8-PB option in the "Pixel Hat / Cape" field. Attached is my screen shot, please help me get the sequences uploaded!!!
Hoping to start my show soon and things look perfect in Xlights, just need to get it to playback correctly.
-Russ
What about saving the sequence to a file and then do a file upload?
So I have them all saved as .xsq files and Xlights automatically created the .fseq which can be uploaded to the FPP so I thought that would be sufficient. I did try uploading directly through the FPP but don't think that made a difference, I will try again though.
I tried following the settings in the FPP manual for upload regarding which version in the FSEQ type and that didn't help either. I'm wondering about the Pixel Hat / Cape now, that seems to pull in the input channels and then maybe the Model box.
Maybe the controller isn't totally setup right? The protocol should be DDP and not E131? Should I enable "Full Xlights Control"? I attached my setup.
I'm spiraling quickly hah, wasn't expecting this roadblock since the sequence files in Xlights were perfect.
I just migrated to this myself. When I had a similar problem, it was that my channels were wrong. My RGB didn't fall in exact multiples of 3. I debugged by running a self test in FPP, followed by the Test menu in Xlights. Those two didn't jibe, so I traced why and my layout was wrong.
Did you use Xlights to configure your channels? I assumed that if it played correctly through xlights output to lights that my channels were correct. I'll definitely try both of those out.


