Hello to all
Sorry for my bad English ......
I would like to make a mega tree, as follows:
24 led strip, each LED strip is 4 meters long with 48 LEDs per meter, would you be so kind as to tell me the controller best suited to manage the plant, which is also considered as a basis for breeding I would use a raspberry, and as software programming Nutcracker .
Excuse my general question but to us here in Italy these systems are not known, and as I struggle to understand English ask advice to you that you are certainly very experienced.
Thanks again for the help.
The E682 controller from Sandevices sounds like what your might be needing if your led strips are pixel type.
http://www.sandevices.com/E681info.html
First you need to determine if using standard LEDs or Pixels? 2 different animals.
The most common I would consider to be a Sandevices E682 if using RGB Pixels, here is a link to that one: http://www.sandevices.com/E681info.html
There are several other ones available to use, Falcon, who makes the Falcon Pi Player for the Raspberry Pi also makes pixel controllers: http://falconchristmas.com/shop/pixelnet-controllers/11-falcon-16-pixelnet-controller-pre-built.html
If you look in the wiki for the forum as well under RGB lighting you will also see a link for controllers as well. Might want to do some reading and see what will work for you and to get an understanding of pixels and controllers. http://www.doityourselfchristmas.com/wiki/index.php?title=Controllers
Also look at auschristmas and look at their lighting 101 manual, it really gives you a good starting point to begin understanding the use of pixels.
Hello
My intention is to check the pixels.
you know tell me a LED strip for use with E682 with 30 pixels / M that can work outside.
I have read the manual but FastEddy to problems with the language I struggle to understand what is right for me.
Thanks for the answers
regards
These are the ones I use for strips. http://www.diyledexpress.com/index.php?main_page=product_info&cPath=42_44&products_id=176
On a tree I generally use these, strips can only be viewed from one side, these you can see from all sides. http://www.diyledexpress.com/index.php?main_page=product_info&cPath=42_44&products_id=179
There are many you can use as well, hopefully this will give you some direction.
