The Mini Tree Maker...
 
Notifications
Clear all

The Mini Tree Maker!

14 Posts
9 Users
0 Reactions
9,962 Views
james70818
Posts: 2045
Topic starter
(@james70818)
Noble Member
Joined: 19 years ago
[#11920]

Well this is my first year of building my display. So last week I started making my 8 channel mini trees that have 1600 lights on them. The first thing I noticed was that rotating that tree gets old real fast! With over 60 different mini trees to make I had a lot of rotating in my future. So I built the Mini Tree Maker!

I took the 4th axis rotary table off of my mill, a 1/4" flex shaft used with my remote control boats, and an drill.

Then I mounted a piece of plywood to the rotary table.

The drill with a zip tie on the trigger then it is plugged into a cheap harbor freight foot switch for a router.


13 Replies
Posts: 168
(@slovanredneck)
Estimable Member
Joined: 17 years ago

Wow... 8 channel mini trees!!! I was impressed with the group buys but this is impressive also. Are you planning on recording your display this year? I'm interested in how your first year turns out. I can only imagine the time that you have invested so far. My family is already getting a little cranky from the countless hours in my first year and I'm not going as big as you are.


Reply
james70818
Posts: 2045
Topic starter
(@james70818)
Noble Member
Joined: 19 years ago
slovanredneck wrote:Wow... 8 channel mini trees!!! I was impressed with the group buys but this is impressive also. Are you planning on recording your display this year? I'm interested in how your first year turns out. I can only imagine the time that you have invested so far. My family is already getting a little cranky from the countless hours in my first year and I'm not going as big as you are.

Thanks, I will make video's as I go and of the final product. You can go to YouTube.com and see the Mini Mega trees. I am at work right now so I cannot go and post a link to the video. But do a search for James70818 and you will see what I have done so far. I have a video with three trees that is really cool but will have to post it later.

James


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago
james70818 wrote:... 8 channel mini trees that have 1600 lights on them...

How big are these Mini's? I have 3ft Minis and while I could have gone to 600lights, I can't imagine fitting more than that on them.

Very impressive. I guess if I gave up a few other hobbies, I might be able to compete. OK, Probably not!

Oh, I love the machine. Of course, not all of use have a rotary axis hanging around. If I do more mini's, I might consider something like this.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I am constantly amazed at the creativity and resourcefulness of DIYC members!


Reply
Page 1 / 3
Share: