any ideas how and why my pixel trees are showing random light colors
i began thinking it was a power problem but not it i power injected every 50 5v leds no fix.
ran 12/2 power wire from power supply to the pixels still no fix.
ran 18 awg for data no fix
ran 12 awg for data no fix.
its strang
wen i run each 50 alone works great wen i state to add other strand then things start to go nuts help.
Sent from my SM-N975U using Tapatalk
What type of controller, which software?
vixen
mega tree i am using teensy 3.2 & octows2811
the 2 small trees 100 pixs ea i use arduino mega.
Sent from my SM-N975U using Tapatalk
ground pin from arduino is tide in to ground on the lights.
Sent from my SM-N975U using Tapatalk
wired like this
Sent from my SM-N975U using Tapatalk
crazy idea but the arduino has a power input that gets 12v in i use 5 volt pix should i diconect the 12v
Sent from my SM-N975U using Tapatalk
I'm not sure how I trust your schematic, but your schematic says 5V SMPS but you said DC12V is supplying power to the Arduino. Your Vin pin is connected to both the power supply and the pixels. If what you said is correct, then you are feeding 12V to 5V pixels.
this is what i went
Sent from my SM-N975U using Tapatalk
Yes, pull the 12v and try. When you supply 12v to MEGA, onboard 5v regulator regulates 12v down to 5v. So external 5v ad 12v are redundant.
thats what i thaught.
Sent from my SM-N975U using Tapatalk
