Quick silly questio...
 
Notifications
Clear all

Quick silly question

8 Posts
6 Users
0 Reactions
3,235 Views
Posts: 319
Topic starter
(@dalep)
Reputable Member
Joined: 10 years ago
[#46417]

Just wondering how you guys secure your lights to the top of the hooks on the tree? Do you simply split the wires apart and drape it over the hook letting the end plug take all of the weight of the hanging light string, or do you fold the light string over the hook and secure it together with a zip tie?

Thanks in advance for the help.
Dale P.


7 Replies
Posts: 191
(@davemck)
Estimable Member
Joined: 10 years ago

I've always doubled over the end of the cord into a loop.

Sent from my XT1650 using Tapatalk


Reply
Posts: 319
Topic starter
(@dalep)
Reputable Member
Joined: 10 years ago

That's what I was thinking but it's my first tree and I want it to go up smoothly.
Thanks!


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
DaleP wrote:Just wondering how you guys secure your lights to the top of the hooks on the tree? Do you simply split the wires apart and drape it over the hook letting the end plug take all of the weight of the hanging light string, or do you fold the light string over the hook and secure it together with a zip tie?

Thanks in advance for the help.
Dale P.

I have found that dangling long runs of lights by their wires is a bad idea. Tieing the lights to a guy wire removes the tension from the wires and keeps them from pulling out of the lights.


Reply
Posts: 173
(@smerk)
Estimable Member
Joined: 10 years ago
Reply
Posts: 431
(@dkelly0802)
Honorable Member
Joined: 11 years ago

Looped over the hook and zip tied.


Reply
Posts: 319
Topic starter
(@dalep)
Reputable Member
Joined: 10 years ago

Guess I should have specified, I'm going old school and using incedecent strings. I got a ton of them last year for .56 cents a box which makes them the cheapest part of the whole project lol! They are GE brand lights which seem to be a bit nicer in quality than the store brands. I'm going to use 96 strings of lights so that would be a ton of guide wires.
Thanks for all the input I will go with the loop and zip tie method, at $60 bucks for all the strings I'm not too worried if they only last a year or two. When they go I will get some strips and up grade to pixels.


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I've done it both ways for my incan and LED strings, but I like the double over and zip tie method the best. I was able to reuse the loop for several years until I sold all the lights off and went with pixels. Never had a problem with wires pulling out of lights but never used anything longer than a single string either which limited the height of my tree.


Reply
Share: