I am planning to build a 25' Pixel Mega Tree for next year and am working out the details. I want to get some kind of hoop built to secure the Pixel mounting strips to. I'm thinking eye hooks would be a good way to go to attach the strips to the base.
The question I have is the diameter of the base. With Incans/LEDs I would think to go about 1/2 the height for the base diam. For instance a 20' tree would have a 10' base ring. With pixels though I would think we want them a bit closer together for a higher resolution image. Thoughts?
I am planning 25' high with 32 strings of pixels probably covering about 240 degrees so the coverage is most of the way around the tree.
I am planning to build a Monkhouse JUMP for the pole to support the tree.
Thanks for any info,
Mark
1/2 of the height for the diameter of the base is a good starting point. As with most things in this "hobby", that is subject to personal taste.
As far as the number of strings to include in the tree, check that you can get that many hooked up to the topper. It is possible, but check it out.
Addressing the attachment to the bottom ring, remember that there are circumstances where a direct tie down works while in other locations/environments there may be the need to "tension" the strings. 5 of my MegaTrees are tied directly at the top and at the bottom (to a hoop connected to the bottom of the tree. One has nothing holding it as it is mostly laying on the ground. The last two have bungee cords holding everything at the bottom. This allows for the strips to flex in the highest winds. The Bungee cords keep a somewhat constant pull and therefore the strings stay straight all the time.
I always use this calculator to help me out on the size of the tree: http://www.altoonalights.com/mega/mega_calc.php
I use an approximately 10' diameter base ring for a 15' tree. I'm happy with those proportions. I just stuck three 10' lengths of 1/2" PCV conduit together to make the ring and then zip-tied the Boscoyo mounting strips to it.
algerdes wrote:1/2 of the height for the diameter of the base is a good starting point. As with most things in this "hobby", that is subject to personal taste.As far as the number of strings to include in the tree, check that you can get that many hooked up to the topper. It is possible, but check it out.
Addressing the attachment to the bottom ring, remember that there are circumstances where a direct tie down works while in other locations/environments there may be the need to "tension" the strings. 5 of my MegaTrees are tied directly at the top and at the bottom (to a hoop connected to the bottom of the tree. One has nothing holding it as it is mostly laying on the ground. The last two have bungee cords holding everything at the bottom. This allows for the strips to flex in the highest winds. The Bungee cords keep a somewhat constant pull and therefore the strings stay straight all the time.
I'm just starting my search for a new topper. Hopefully I will find something strong enough to hold everything without bending or cracking. Not sure I've see any metal heads that hold enough strips. I heard Boscoyo might be working on something new that will be stronger.
I was thinking about going Bungees but have heard differeing opinions on them. I will have to dig a bit deeper and see the best way.
Thanks for the feedback!
