I threw this together over the course of two days with some bullet strings I had laying around. It's not the prettiest thing in the light, but it's magnificent in the dark with 50% power. It needs some paint, but otherwise I think it turned out okay.
Without much in the way of plans, i started tacking together the frame out of some wood I had laying around. The frame is primarily 1x4 pine. It's 18" wide at the top and 54" at the bottom. It has 12 strings of 50 pixels mounted to boyscostudio. I also laced it with more spare strips every 12" vertically to give it more support. Because there are only 95 holes in a strip, I was only able to fix 46 pixels per column. I left the others hanging at the bottom and remapped them with FPP to stay dark. I just couldn't bear to cut them off, though I could have used one less string had I just routed the strings end to end, but the jumps to the next column at the bottom would have been tight as they're a shade over 4" apart down there.
Data is fed in two places to keep the pixel count below the 340 limit I have with the Falcon controller. At the top, data, power and ground are looped over. At the bottom, power is injected in 8 locations so that no pixel is more than 50 pixels from power. Even at full brightness, I can't see any dimming anywhere.
Using two ports from a Falcon differential board mounted in a ta200. Power from a dedicated 300W meanwell that has power factor correction for led signs. Everything is 5 volts.
Edit: I almost forgot, I'm going to top it with a 24" coroplastic star today. Is this not the gaudiest thing you ever saw. 😉

Sent from my Moto G (4) using Tapatalk
Very nice!!! I love doing those, what can I make projects!
Sent from my iPhone using Tapatalk
Thanks. Maybe I should spend more time planning, but learning from hindsight sticks pretty well with me. 😉
Sent from my Moto G (4) using Tapatalk
Here it is mounted, complete with star.

Sent from my Moto G (4) using Tapatalk
Even better!!!
Sent from my iPhone using Tapatalk
