Notifications
Clear all
Feb 11, 2019 7:13 pm
aknflyer wrote:I use xlights with 24 strings. Wiring, I used 3 ports + 1 port for 270 node star. Here is the wiring, but be aware not all strings are interchangeable. Some go up, some down, some with pwr inject. Star is not shown in drawing.
Thanks, this is exactly what I was looking for. I see it can be done in XLights, can it also be done in Vixen? Also, in your diagram, what do A1, A2, ..A6, & NC PWR represent?
-mc
Feb 11, 2019 7:33 pm
yes vixen allows you to patch elements in reverse element order, allowing you to output zig zag data to the controllers.
Feb 12, 2019 11:04 am
MartinMueller2003 wrote:yes vixen allows you to patch elements in reverse element order, allowing you to output zig zag data to the controllers.
Relative to aknflyer's diagram, does Vixen support forward,reverse,forward,reverse,forward,reverse,forward,reverse on a single string?
-mc
Feb 12, 2019 11:40 am
Yes It Can
AND you can do fun things like 17 reverse, 5 forward, 9 reverse, 22 forward, 15 reverse all on a single string.
Feb 12, 2019 12:43 pm
MartinMueller2003 wrote:
AND you can do fun things like 17 reverse, 5 forward, 9 reverse, 22 forward, 15 reverse all on a single string.
FYI: This saved my butt when I discovered that I had wired my first matrix upside down AND backwards.
