Hi, all...
I'm thinking about cutting a hole in the lower octagon on my deck, and putting a mega tree in the middle. I could use the hand rails, for the bottom, giving me a 25+ foot tree, with about a 14 foot diameter. Here's the deck, before it was finished:



Has anyone ever done this? How'd it work out?
I think it would be quick and easy, plus, going through the deck, and tied to the outside, I could go about as high as I had to, to make it look good, plus, it would sure be secure!!
Here's the house, to give you some idea (you can barely see the deck):

Whatcha think?
R

If you were to do this 25 feet would not be nearly high enough..50 feet or 75 feet might be to have it really look good..Light spacing would be about 3.25 inches to 4.50 inches and it would really be full...If you were to go 60 feet high it would work better math wise..3 70 count led strings per hung line going up and another 3 down..So basically 6 strings per would look hotter then hell...Not sure of your height clearance tho...Anyway just my idea's on it..
Joe..
I like the idea in general. But I see you have a flag pole in the same area. Why not use that for a slightly smaller mega tree and save yourself from putting a hole in a nice deck?
Just a thought before you drill... How about a 2-foot piece of 2x8 with a hole about half-way through, then use 2x4s (probably six or so) as legs outward to your existing posts. Easily taken up post-season and no holes!
Ace Hardware had this item that allowed you to put up a tree on a boat dock or deck. It was a metal piece that slide between the decking boards using its mounting cylinder that has a sturdy stainless steel t-bar that fits between wooden planks, allowing you to secure it once the t-bar is turned perpendicular to the planks.
Something like this.. https://www.acehardwareoutlet.com/(uh0sk145nkqohuytnr5lkf45)/ProductDetails.aspx?SKU=9098328 Might want to check out an Ace Hardware as they only sell this in packs of 6 online.

