Mega Tree - how man...
 
Notifications
Clear all

How many light strings on your Mega Tree? Poll is created on Nov 09, 2026

  
  
  
  
  
  
  
  

Mega Tree - how many strings??

19 Posts
11 Users
0 Reactions
11.1 K Views
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

Use the mega tree calculator then..Works great,you input the size,length of strings,radius you want to use etc...It give you how many strings you need to make it happen.If you are going to do it in 4 colors like me then you simply multiply that by 4.Then you go to the power side and it will also tell you how many amps per channel for all the lights you are using...Great little tool..I can't remember you built it (the downloadable version) but it works great...If you need the tool drop me an email with your email addy and I'll send it over to make your life easier..
Joe..


Reply
Posts: 1062
 Ronp
(@ronp)
Noble Member
Joined: 20 years ago

this one is 10 foot high 48 100 ct strings 24 red and 24 green
each ch has 2 legs and then i doubled the lights so 2 strings per collor per leg
http://media.putfile.com/christmas-07-34
so 24 ch


Reply
51fordf2
Posts: 1280
Topic starter
(@51fordf2)
Noble Member
Joined: 18 years ago

Joe - you are not understanding...I don't want a "how-to" or a calculator, or anything else. I am curious how many strings others are using for their trees. Plain and simple. I have seen a lot of trees, some I like, some not so much. I'm trying to get a feel for what people are using, not how they are doing it...

The "how-to" is for another time, another thread...

Thanks,

Roger


Reply
51fordf2
Posts: 1280
Topic starter
(@51fordf2)
Noble Member
Joined: 18 years ago

Ron - that's what I'm talkin' about!! Nice and full, and a lot of "action", out of 24 channels!

Thanks!

R


Reply
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

Rogers I fully understand what you are after..It's why I said what I did to get you the look you are after...48 strings or 100 strings of lights doesn't matter without key points to remember...To get a better sence of that you have to look at the height,diameter etc...All those vary so it makes little difference what one did over another if that doesn't follow the same suit..One might have a base at the bottom one might not..It all plays a factor so your going to get the answer to your questions truthfully...Only if you calculate it yourself will you get that answer then compair what you have seen to what you get and adjust your design accordingly...It's what everone else does to get the look they are after..It all foloows a basic stamp..Varies from there of course but it all follows the same basic rule...Height first 25 feet ok no problem...It's all in the spacing as to what looks good or not...Quanty of lights is equal to the spacing between them..If you have 6 inches between your lights then you have gaps which is not as desireable...If you have 2 inches between each string it makes it look fuller...Or even 3 or 4 inches..Personal preference here....For my design I'm going with a 2 inch spacing as my tree will only be 6 feet tall...The calculator helps you with all this as to what will in the end look good..PLus give you the overall shape you are seeking..

So beleive me when I say this I do fully understand what you are after..I'm simply trying to get you there faster...Just like how I got there...
Joe..


Reply
Page 2 / 4
Share: