Notifications
Clear all

tree wrap

8 Posts
5 Users
0 Reactions
3,748 Views
Posts: 281
Topic starter
(@bert-nc)
Reputable Member
Joined: 18 years ago
[#29418]

wife has decided that the trees (tree trunks) around the house would look good wrapped in lights, and as normal, she is correct.

just need to find a way to have lights fasten to some material that is bendable, that can be attached to tree trunk, and and easy to set up.

was thinking of coro. was going to lay flat and attach with zip ties. just a lot of wire excess wire to haggle with.

was planning on using mini lights I had bought on sale several years ago from Wal-mart and Lowes.

as always suggestions welcomed

bert-nc


7 Replies
Posts: 231
(@mwestling)
Reputable Member
Joined: 14 years ago

Bert-NC, take a look at this thread. There are two methods discussed here and both are far cheaper than Coro and easier to bend around the trunk.

http://doityourselfchristmas.com/forums/showthread.php?29909-Tree-Wraps


Reply
Posts: 14
(@keitha43)
Active Member
Joined: 16 years ago

Hardware cloth from a Home Depot or Lowes. http://www.homedepot.com/p/Tenax-3-ft-x-15-ft-Black-Hardware-Net-751397/100384025# I used it to make my Halloween face. It would easily wrap around a tree and you can zip tie the lights.


Reply
corytcline
Posts: 1249
(@corytcline)
Noble Member
Joined: 16 years ago

How about just using net lights? I've never done it but seems it would be a quick way to wrap with no other materials needed.


Reply
corytcline
Posts: 1249
(@corytcline)
Noble Member
Joined: 16 years ago

Sorry missed the part about using mini lights you already have.


Reply
Posts: 14
(@keitha43)
Active Member
Joined: 16 years ago

Hardware cloth from Home Depot or Lowes. It is like a plastic grid. Very flexible. I posted a link but it is under review so I reposted without the link. Just search hardware cloth at either site.


Reply
Posts: 281
Topic starter
(@bert-nc)
Reputable Member
Joined: 18 years ago

thanks for the ideas.

will do a little experimenting after the first of the year to see how they work out

bert-nc


Reply
Posts: 22
(@mrbob135)
Eminent Member
Joined: 14 years ago

I noticed the hardware cloth comes in three foot width, and the plastic poultry fence in two or three foot widths. I am considering using this technique to wrap the pillars on my porch, but would need to reduce the width to about 1 foot. Is this material sturdy enought to support the lights when cut in half, not having the larger re-enforced border pieces on both sides? Thanks.


Reply
Share: