Pixel lights
 
Notifications
Clear all

Pixel lights

14 Posts
6 Users
0 Reactions
8,441 Views
Posts: 139
Topic starter
(@tomperro)
Estimable Member
Joined: 13 years ago
[#31103]

So, let me get this right...
If i want to do rgb i would need a channel for each individual led bulb?

Sent from my VS930 4G using Tapatalk


13 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

depends on which type of rgb you are taking about if you are taking single string rgb where the whole string lights red then green then blue (

) it would take 3 channels like you said 1 channel red 1 channel green 1 channel blue if you are talking rgb pixels where you control the color of each pixel it is 3 channels for each pixel on string ( http://tinypic.com/m/i2q5qw/1 )


Reply
Posts: 139
Topic starter
(@tomperro)
Estimable Member
Joined: 13 years ago

Wow! I'm talking about where you can chase and change colors and all

Sent from my VS930 4G using Tapatalk


Reply
Posts: 139
Topic starter
(@tomperro)
Estimable Member
Joined: 13 years ago

Something like this... On the eaves.
http://m.youtube.com/watch?v=c1C9nysQv1I

Sent from my VS930 4G using Tapatalk


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Yes, in "pixels" you have 3 channels per "light", so a string of 50 "pixels" would have 150 channels to run each one independent of each other.

This is not like old style channels where you physically wire each channel. pixels share a common positive and negative wire, then have a data wire to send the information to each pixel, some also have a 4th wire for a clock signal, most common ones now are just 3 wires (+, -, data)

Possibilities are almost endless, almost whatever your imagination can come up with.


Reply
Posts: 139
Topic starter
(@tomperro)
Estimable Member
Joined: 13 years ago

So, how many pixels can I run on a Renard ss24? 24 pixels?

Sent from my VS930 4G using Tapatalk


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

yes it is like the ones I had hanging on my wall as I was testing and wiring them that is full controllable rgb pixels like
Electrified3 said a string of 50 pixels takes 150 channels need a pixel controller too control them I am using 2 px-1s too control the 6 strings I have and a 26 a power supply too run it all you can't run pixels on a renard ss board


Reply
Posts: 139
Topic starter
(@tomperro)
Estimable Member
Joined: 13 years ago

That gets expensive real quick!

Sent from my VS930 4G using Tapatalk


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Different type of controller here, we are not turning power on and off, we are sending power and data signals to the IC chips in the "Pixels".

I like Sandevice stuff, E682, E6804, but there are many different ones out there, check the wiki, they have quite alot of info on different controllers, pixels, how to...... I would highly suggest starting there reading up on Pixels and get an idea how they work.


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

That gets expensive real quick!

Probably alot less expensive that you think, an E6804 can run around 6000 channels and costs about $100


Reply
Page 1 / 2
Share: