Well have some plans for next year, but how hard would it be to make a few chase controllers that could handle at least 15 amps. Or with that kind of load would i be better off buying some? Want to do this cheap but i'm not too sure on building some like this. All i want them to do is chase. And advice? thanks
well ren 24ss is the preferred choice of this site ,,,lynx 16 is good too ... and there are others too .... has for chasing they all do as it is control with the software ... like vixen ,,hls ect ..
cheer and welcome to the craziness
most controler they have a group buy in january so you can get them cheaper ...
Is this to animate wireframes?
How many channels to the chase?
mwalz wrote:Well have some plans for next year, but how hard would it be to make a few chase controllers that could handle at least 15 amps. Or with that kind of load would i be better off buying some? Want to do this cheap but i'm not too sure on building some like this. All i want them to do is chase. And advice? thanks
Actually this is for my 3 mega trees i have, i might have a 4th one next year, i was looking for a real cheap way to keep the amps down by not having all the lights on at once
mwalz wrote: i was looking for a real cheap way
well, one 24 channel Renard SS will set you back well North of $100 by the time you buy it, build it, wire it, and communicate with it. Not to scare you away or anything but DIY doesn't necessarily mean inexpensive. Many members here have $1000's of dollars wrapped up in controllers alone. Plan accordingly, I would recommend you get your feet wet with Vixen or HLS first and start working out a sequence or two. They both have means to preview on screen what your display might look like, and by virtually creating your effects first, you can get an idea of how many and what type of control hardware you are going to need. I sequenced my first singing pumpkin song before I spent a nickel on any hardware whatsoever, and in so doing I knew I needed 8 channels to get what I wanted to happen the first year.
BTW a single (renard) channel's TRIAC is rated at max of 6 amps, I think the common practice is to keep them each under 2, preferred around 1 amp, (correct me if wrong guys!)
