i have tried a usb to serial connector on my ren c but dosent want to work very well channels like to flicker on an off randomly is there settings i need to change
I tried the USB to serial connector method first and it was a waste of time for me.
If you have a PC for your show computer with an open PCI slot you are better off getting a MOXA multi port when they come available.
Mudsculpter wrote:If you have a PC for your show computer with an open PCI slot you are better off getting a MOXA multi port when they come available.
<< this.
Last year I was having problems with Vixen and 'access denied' errors (someone please correct me). Others commented that they only see that problem when using USB to RS232 adapters, so I went ahead and purchased a cheap ($12) 2 serial port PCI card for this year. Hopefully this new card will clear up that error.
Monoprice has them for a buck cheaper, but I can't recomended them any more. They've screwed up 4 of my last 11 orders - 3 were missing stuff, and the last one they sent wrong stuff.
During setup I usually have the same errors. I can't really explain why it happens though. A reboot clears things up.
Mudsculpter wrote:During setup I usually have the same errors. I can't really explain why it happens though. A reboot clears things up.
For me, a reboot fixes the problem for a random amount of time -- 1 day to more than a week. Then it shows up again.
