Notifications
Clear all

Performance issues with HLS

12 Posts
6 Users
0 Reactions
4,729 Views
Lionking_Tx
Posts: 780
Topic starter
(@lionking-tx)
Prominent Member
Joined: 15 years ago
[#23160]

Joe,

I just ran the test of a new song and the delay was just terrible when playing it back direct through HLS - the E68x controllers were sorta OK (they had a small lag) but the Entec USB dongle missed complete frames.
When I compiled the data for show and ran the compiled data, it worked fine, however the delay between end of the song and start of it was around 1 minute (if not longer) and there was no output at all during this time.

My show PC is not the fastest (2.3 ghz dual core / 4GB) but should be more than capable putting a few packets on the wire while having lunch with friends.
I see that you compile the data every time the playlist is started/repeated - is that really necessary or do I do something wrong ?

Btw, I'm trying to run 27 universes (almost maxed out) utilizing Nutcracker effects *very* heavily

Side note:
I converted the mega tree and roof grid to pixel planes, however kept smaller objects like the driveway arches as "normal" channels. Loading the sequence into HLS on an I7 quad core takes around 10 minutes with the CPU cores "being bored" at around 15% load...memory usage only around 40% and HD usage completely negligible, so why is it taking so long ? Is HLS not taking advantage of available resources ?
Haven't timed the show PC, but I think it was around 25 to 30 minutes to load the sequence....

Any performance improvement appreciated - maybe just skip the compiling every time the schedule runs ?


11 Replies
Posts: 3650
(@jhinkle)
Famed Member
Joined: 15 years ago

Version 10R is released.

All Songs within the Playlist are loaded at the start of the Show event to minimize delay between songs.

I have fully tested SHOw times, etc.

I don't have lights - so I need you to verify the Blinkies work as they should.

Please report back on your findings,

Joe


Reply
Posts: 132
(@brianj)
Estimable Member
Joined: 14 years ago

Tried it twice here, two sequences in the show, on ``play show schedule`` both sequences load up but when the start time comes up nothing happens
* hls will no longer play anything. the initial channel count box hangs on ``working element 2`` and a show will not run manually as well


Reply
Lionking_Tx
Posts: 780
Topic starter
(@lionking-tx)
Prominent Member
Joined: 15 years ago

Thanks Joe - Did a quick test with one song in a schedule, but I must have done something wrong as the schedule never started (Play now didn't work either).

Will do some more testing later tonight, for now I'm running the old sequence direct in HLS.

Edit:
One additional comment - When I selected "Play Schedule" and selected the playlist, it didn't show a start/end time, but seemed to load the sequence.


Reply
Posts: 132
(@brianj)
Estimable Member
Joined: 14 years ago

PM'ed the files to you Joe 🙂


Reply
Page 1 / 3
Share: