Helix Ether-Node Co...
 
Notifications
Clear all

Helix Ether-Node Controller

108 Posts
8 Users
0 Reactions
73.5 K Views
Posts: 947
(@warlock)
Noble Member
Joined: 19 years ago

Looks great Greg... Have you figured out a final cost per board built yet ????


Reply
Posts: 410
Topic starter
(@gmbartlett)
Honorable Member
Joined: 19 years ago
Warlock wrote:Looks great Greg... Have you figured out a final cost per board built yet ????

The parts cost looks like it will be about $65 for the wired option and $100 for the wireless option. So with a PCB cost of about $15.00 the total build cost would be about $80 - $115.


Reply
Posts: 191
(@mlevings)
Estimable Member
Joined: 14 years ago

Any updates on the Ether-Node Greg? I'm waiting on a successful test before I pull the trigger and get order some pixels.


Reply
Posts: 410
Topic starter
(@gmbartlett)
Honorable Member
Joined: 19 years ago
mlevings wrote:Any updates on the Ether-Node Greg? I'm waiting on a successful test before I pull the trigger and get order some pixels.

I've ordered the PCB and new microSD card sockets. However, they are on a slow boat from China. I don't expect to receive them for a few more weeks. So I won't have any results for a month or more.


Reply
Posts: 410
Topic starter
(@gmbartlett)
Honorable Member
Joined: 19 years ago

Re: Helix Ether-Node Controller (Progress Finally!)

I'm finally making some headway on the Ether-Node firmware. I just completed a test with a 50 ms event period pushing out three DMX universes (510 ch each) and driving the equivalent of four 127 pixel strings. Everything worked great.

I still need to test it further, both with 25 ms event periods and up to 48 DMX universes. But that is going to require some additional sequencing work and more room to set up. Unfortunately I don't have 64-127 pixel strings nor do I have four e682 boards.

What I do have is two e682 boards and four 50 pixel strings. So I plan to setup one of the boards as the first board and the other one as the fourth board. I will then connect up one of the pixel strings to the first output on the first board and a second on the last output on the first board. I will then repeat the same with the "fourth" board. My plan is to drive the stings as if they were 127 pixel strings and put the same output to all of them. That way I can see if they stay in synch with each other. If all four strands respond as expected then that would be a good indicator that everything in between is working also since all of the DMX universes (1 to 48) had to be sent out.

I'm much more comfortable with letting this out in the wild. The firmware this year probably won't have all of the bells and whistles but it will be functional. If anyone is still interested in getting a Helix Ether-Node this year please send a message to me at orders "at" helixlightcontroller "dot" com and let me know how many boards you would like and your ZIP Code or country (if outside US).

The price for each board is $15.00 ($12.00 for the PCB, $2.00 for the microSD socket and $1.00 for the EEPROM) plus PayPal and Shipping. I have a limited quantity (10) available this year.

I really appreciate everyone's patience with me on this. It has taken A LOT longer than I expected and my time this year was taken up but other forces outside of my control.


Reply
Page 2 / 22
Share: