**CLOSED**
 
Notifications
Clear all

**CLOSED**

28 Posts
9 Users
0 Reactions
12.2 K Views
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago

Thats a different unit.


Reply
Posts: 56
(@jwells)
Trusted Member
Joined: 19 years ago

I askeb Ben and its the same seller. I suggested we look at that model


Reply
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago

I just want to make sure the coop participants go into this coop knowing the particular unit has not been tested by anyone, if that is the case. Same seller is fine but it does not guarantee it will do what people are expecting.


Reply
Posts: 56
(@jwells)
Trusted Member
Joined: 19 years ago

Ben

When I agreed to participate it I thought it was the model that was discussed on
PC forum which is the 1watt version with the PLL but I have since discovered it was not then I sent you a PM. I don't want to get the .2watt version.

Jim


Reply
kostyun
Posts: 2178
Guest
(@kostyun)
Member
Joined: 20 years ago

Also, remember by bringing in a 1w version this is technically an illegal transmitter without a FCC license.

I'm not trying to be rude/mean/etc here, but, please be careful on what you do here. If this is a true 1W transmitter, and you knowingly sell it, you could be open to potential liabilities. (as you being the importer)

A true 1W transmitter with a proper antenna could transmit up to 10 MILES! Many people use low power transmitters for things in there home, cars, Fitness clubs, etc. (IPods, Satellite Radio, etc) You could open yourself to a HUGE liability. If a sports club (say LA Fitness) calls the FCC to complain you will be getting a nice little visit from the FCC and could result in a 10,000 to 25,000 dollar fine.

As the DIYC community moves forward, we need to look into "the bigger picture" of this. More and more people are starting to look into, and laws/regulations do need to be kept in mind.

My earlier post suggested using the ramsey transmitters. The basic ramsey transmitters are capable of 20-100mw, and output MORE than enough quality power for our use here. They are even availible as "kits" that you can solder up yourself.

Also, people have had great success with the $20 belkin units.


Reply
Page 4 / 6
Share: