OK folks, I am no longer considering myself a noobie. Moving up into ADDICTED....I have been using a Ren16 controller running Vixen 2.0. I have about 35 - 40 sequences programed for my home. I am now adding a REN24 giving me 40 channels.
Question is, what is the easiest software to use that is free or cheap? I am looking for simplicity of programming. I started to tinker with Vixen 3.3 but my brain is not working to grasp it at this time. Much thanks in advance.
Vixen 3 or xlights are the two best choices, paid or free (both are free). I have used both and found both to be user friendly. However, for the tech challenged there are tons of tutorials for both. If you are struggling, go watch a video or two.
James
Sent from my SM-G900V using Tapatalk
If you do not plan to delve in to Pixels at all, Vixen 2.1 may be your best bet.
rstehle wrote:If you do not plan to delve in to Pixels at all, Vixen 2.1 may be your best bet.
Agreed!
Vixen 2.1 will be great even if you only have few pixels. I ran 200 pixels with Vixen 2.1 and it's alot of work but easier than learning new software. I had trouble getting Vixen 3 in my head too. Try Xlights, it might be easier to wrap your head around. But with your channel count and all ac controllers you don't need to switch yet if you don't want to.
