settings for baud r...
 
Notifications
Clear all

settings for baud rate in computer

6 Posts
3 Users
0 Reactions
4,085 Views
TazChaLet
Posts: 3042
Topic starter
(@tazchalet)
Famed Member
Joined: 13 years ago
[#35892]

I am wondering if when setting up vixen you set the baud rate too match the controllers do you have too go into your systems devices of your windows and set the port too the same baud rate?


5 Replies
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

you shouldn't have to touch it in the windows devices. The program should open the port with the correct settings when it starts. The settings in the windows devices page are more for (really old) legacy software that doesn't set the port settings for you. To my knowledge, all of the sequencers do it for you.


Reply
TazChaLet
Posts: 3042
Topic starter
(@tazchalet)
Famed Member
Joined: 13 years ago

thanks Jon looks like I will be have too use vixen 3 on my normal computer wanna do 230400 baud rate for my px-1s and looking vixen 3 is only 1 I see that supports it vixen 2 is 115200 max and xlights skips it and goes too 250000 just need too figure out how I can up my ram sitting at 4 right now and not sure if that is enough too run show with so exported and used old computer with xlights this year

jchuchla wrote:you shouldn't have to touch it in the windows devices. The program should open the port with the correct settings when it starts. The settings in the windows devices page are more for (really old) legacy software that doesn't set the port settings for you. To my knowledge, all of the sequencers do it for you.

Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Xlights doesn't do it? You should bump those guys and ask. That should be a fairly easy tweak on their end.
But at the same time, it's important to note that your com port has to support the rate in order to work. 115200 is the highest "standard" rate. Beyond that, you find spotty support in the actual serial device hardware.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
TazChaLet
Posts: 3042
Topic starter
(@tazchalet)
Famed Member
Joined: 13 years ago

yeah I dropped a thread for xlights about the baud rates available after I posted this I know they are doing alot of work on it so we will see if it will be available these are only ones in xlights now 9600,19200,38400,57600,115200,250000

jchuchla wrote:Xlights doesn't do it? You should bump those guys and ask. That should be a fairly easy tweak on their end.
But at the same time, it's important to note that your com port has to support the rate in order to work. 115200 is the highest "standard" rate. Beyond that, you find spotty support in the actual serial device hardware.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Page 1 / 2
Share: