I have gotten a new computer from last year, used Xp last year and Win7 this year. I have This adapter that worked flawlessly last year, I was having issues with the computer recognizing the adapter but I got that sorted out. Now I am having the following issues, any help would be greatly appreciated.
- I got a signal to the board, BUT it only plays a sequence with music for about 4-6 seconds then the channels freeze up. I can unplug the power from the board and adapter from the computer, then plug both back in and get the same results again. However if I play just a sequence with NO music it will play fine. Any ideas?
Computer specs -
Compaq
Windows 7 home Premium (64bit)
Intel Celeron 2.20ghz processor
2 GB memory
Tried on a friends system running vista and having the same issue.
No Music = Fine
Music = Freezing
Also should note that this is using Vixen 2.1 and a Ren24ss, off to hang some lights. hoping for good news.
Not that it matters that much but are you sure it's a Celeron? I didn't think those did 64-bit Windows but could be wrong.
Just a guess but it sounds like an port/IRQ conflict between your sound card and either your adapter or video card. Are you playing it with the Adjustable Preview? If so, does it run without it? What sound card is it - does it have any configurable options on it for ports, etc that you can play with? Have you updated the drivers for your hardware?
Trying with the update of drivers.
Im getting frustrated. After running a No music sequence it still freezes after about 10 minutes or so. 😡
driver update was no help.
Both boards have same symptoms. Changed settings for the USB to 485 adapter to match port settings in VIXEN, still no change. When running a sequence with music it ranges from 6-28 seconds depending on how much is going on with the song. When running a sequence with 0 music it will run for awhile but will still freeze up. Could it be the USB port on the computer is not communicating fast enough to keep up? how do you tell if you have high speed USB.
Did you say you are running with Adjustable Preview on? If so, try unchecking it so it doesn't run while running the sequence.
No adjustable preview. Tried all my USB ports as well to no avail. May have to be a static christmas for me this year. I really dont think Windows7 has anything to do with it at this point.
I would suspect it may have nothing to do with the adapter and may have something to do with the sound. If you run a sequence with sound while the output plugins(Renard, etc) are disabled, does it hang then?
Also, in the first post you linked to a serial to RS485 adapter. Is this the one you are using or are you using a usb one?
