I have been working on an Open Source alternative to the Ren64 since I was unable to contact WJohn over the summer, and I was just wondering if there was anyone out there who would use such files in the future. I don't want to step on any toes or anything.
ulto wrote: I don't want to step on any toes or anything.
It's an admirable goal but will be extremely difficult to pull off....
The Ren64 is always available from g2ktcf at www.wlcventures.com, too...
I'm assuming you mean "open source hardware" since the software is available here: http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_Firmware
I agree that it's both admirable and will likely be difficult. Good luck!
You mean like this....
http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=17&Itemid=36
Chris doesn’t sell the bare boards but does the board with all of the parts for less than you could get just the parts at yourself.
There’s nothing wrong with creating your own boards but you may be on your own. I’ve built up the exact same Renard XC board that Chris sells but I’ve also created my own surface mount versions that meet my needs and desires. I have alternate ways of creating boards and getting parts than you may not have though.
The Renard XC has been around for several years now and has an excellent track record. You’re certainly welcome to create another one but the need is currently filled. If you create a design that is significantly cheaper, you’d likely get more support though.
Wayne J wrote:You mean like this....
http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=17&Itemid=36
nice!
im interested in the Ethernet boards you are using (the ones on the outside of your case -you connect your ssr's to)
nice case too 🙂
do you have these available?
if not CAN YOU????
and how much?
Wayne J wrote:You mean like this....
http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=17&Itemid=36
Wayne
You selling those enclosures yet? =)
keebler wrote:nice!
im interested in the Ethernet boards you are using (the ones on the outside of your case -you connect your ssr's to)
nice case too 🙂do you have these available?
if not CAN YOU????
and how much?
Sure thing, here is the file to use for home etch.
Wayne J wrote:Sure thing, here is the file to use for home etch.
not quite what i meant...
i was looking for etched boards, maybe even a kit
keebler wrote:not quite what i meant...
i was looking for etched boards, maybe even a kit
You know what, let me look. I might have a couple back there I did not use, already etched. I will look later.
