Controller possible...
 
Notifications
Clear all

Controller possible Vixen Issue

9 Posts
4 Users
0 Reactions
2,505 Views
gweedojg
Posts: 55
Topic starter
(@gweedojg)
Trusted Member
Joined: 16 years ago
[#22456]

I set up my program to start and stop at a specific time. For some reason after a short while the lights arent flashing but program is still playing on. If iI turn off Vixen and fire it back up it starts working again.Any ideas?


8 Replies
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

There's a couple of things I would check first.
1. Make sure you do not have any antivirus/antimalware software running.
2. Make sure Windows updates is turned off.
3. Turn off any screen savers.
4. Turn off any sleep/power saving settings.
5. Make sure you don't have Adjustable Preview turned on in Vixen while running the show.

If possible, I've found it best to run the show on a dedicated computer with just a basic Windows installed and nothing else.


Reply
gweedojg
Posts: 55
Topic starter
(@gweedojg)
Trusted Member
Joined: 16 years ago

I checked my computer and I dont see anything that would cause it to do this. I do have one thing that i keep going back to in my head. I have always ran three renards 16s i bought from Kelly, kychristmas and they have been fine. But i just bought a new renard 24 on here. when i added that one i think that maybe thats when the issue started. Is it possible that adding a new controller that is up to date against the older three renard 16s would cause some glitches? Just a thought


Reply
buymyemu
Posts: 638
(@buymyemu)
Prominent Member
Joined: 16 years ago

Do you hear the music, but no lights go on? Does it do it at the start of a particular song?
And do the lights come back on when it circles around to the first program again?


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago
gweedojg wrote:I checked my computer and I dont see anything that would cause it to do this. I do have one thing that i keep going back to in my head. I have always ran three renards 16s i bought from Kelly, kychristmas and they have been fine. But i just bought a new renard 24 on here. when i added that one i think that maybe thats when the issue started. Is it possible that adding a new controller that is up to date against the older three renard 16s would cause some glitches? Just a thought

I am currently running 6 XMUS 16's(the old style which may or may not be what you got from Kelly) a 16ss and 2 ss24's without any similar issues. I'm just saying this to show that mixing controllers shouldn't be an issue.

I would bet it's a computer issue but I have seen com ports act funny in the past. If you're connecting using a serial cable I would try changing that to see if it fixes the problem...again, I don't think that's the issue, just a quick possible fix.


Reply
Page 1 / 2
Share: