Notifications
Clear all

Pi help

29 Posts
5 Users
0 Reactions
9,411 Views
Posts: 383
Topic starter
(@aesl1982)
Reputable Member
Joined: 12 years ago
Setarcos wrote:Sorry, I disagree on this point. FPP will use whichever interface has the default gateway assigned to reach out to Github to pull updates. It doesn't matter if this is eth0 or wlan0. All of my FPP instances use wlan0 to pull updates and I have had no issues with this.

Ok so I did two things. I noticed even though no Ethernet from Pi to anything I did have the Ethernet cable going from computer to switch I unplugged that and also typed in fpp in the host name box. Went to manual up day and it worked. Thanks a lot man


Reply
Posts: 383
Topic starter
(@aesl1982)
Reputable Member
Joined: 12 years ago

Now I need to fix my other pi that got corrupted I'm guessing I can do that using the same laptop with Pi plugged into this switch or do I need to put that Pi on the router to re do everything on it

Sent from my iPhone using Tapatalk


Reply
Setarcos
Posts: 169
(@setarcos)
Estimable Member
Joined: 12 years ago
aesl1982 wrote:Now I need to fix my other pi that got corrupted I'm guessing I can do that using the same laptop with Pi plugged into this switch or do I need to put that Pi on the router to re do everything on it

Sent from my iPhone using Tapatalk

Glad you got it working!

If your other Pi isn't totally hosed, you can use the NOOBS recovery mode to reinstall the FPP image (with the USB stick removed), and then once the image is installed, you would boot it up with the USB stick reinstalled. You will need a USB keyboard and HDMI monitor attached to do this and hold down Shift when instructed by the bootloader to enter recovery mode.


Reply
Posts: 383
Topic starter
(@aesl1982)
Reputable Member
Joined: 12 years ago

Yah the other pi was user error being idiot lol the sd card wasn't all the way in.

Sent from my iPhone using Tapatalk


Reply
Posts: 383
Topic starter
(@aesl1982)
Reputable Member
Joined: 12 years ago

Went to manual update on this Pi and everything is same except host name is "master" it's on 1.7-35. And I'm getting same error message as the other pi was "cannot acces github unable to pull GitHub updates

Sent from my iPhone using Tapatalk


Reply
Posts: 383
Topic starter
(@aesl1982)
Reputable Member
Joined: 12 years ago

This one working also now had the gateway different wow. This networking stuff is crazy lol. Thanks for everyone's help I appreciate it

Sent from my iPhone using Tapatalk


Reply
Setarcos
Posts: 169
(@setarcos)
Estimable Member
Joined: 12 years ago
aesl1982 wrote:This one working also now had the gateway different wow. This networking stuff is crazy lol. Thanks for everyone's help I appreciate it

Sent from my iPhone using Tapatalk

Glad things worked out. FYI if you run into issues in the future, consider posting over on the Falcon FPP forum as more FPP users tend to be active there to answer questions.

Sent from my XT1254 using Tapatalk


Reply
Posts: 383
Topic starter
(@aesl1982)
Reputable Member
Joined: 12 years ago

That's where I originally posted.

Sent from my iPhone using Tapatalk


Reply
Posts: 451
(@utimgr)
Honorable Member
Joined: 14 years ago

Sort of after the fact but, sometimes you're not sure of the IP of a device on the network. I use IPscan(32 or 64) to find the address. If its sticky, thats great but sometimes things will move when using DHCP


Reply
Page 3 / 3
Share: