Finally got the source code working!
Explanation & video clips here:
http://response-box.com/rgb/2009/04/field-programmable-source-code/
JEC
JEC,
Any chance of offering the programmer board only and posting the pic code?
I'm not saying the $46 price isn't fair, but it's nice to DIY it whenever possible.
ukewarrior wrote:... but it's nice to DIY it whenever possible.
This is a do it yourself site after all.
The current board (have about 30) needs another rev to clear out a couple of airwires. I'll clean it up & post a parts list when I can.
May also replace the LCD with 3 x 7-segment LED displays. Saves $8 or so.
While your message format should work, I must point out that alternate start code 0x50 is registered to LightProcessor Ltd by the ESTA, the group in charge of DMX and related matters. http://www.esta.org/tsp/working_groups/CP/DMXAlternateCodes.php
If you don't want to implement that in RDM, the protocol created for such things--and there are valid reasons you might not--the suggestion in the second paragraph of the link above may work for you.
The number of Alternate START Codes is limited to 255 possible values and many of these are already assigned or in use. Therefore, it is necessary to conserve the number of ASCs that remain for those few occasions when only an ASC will serve the purpose. Manufacturers are encouraged to obtain a two-byte Manufacturer's ID and to use it with Alternate START Code 91h to create a proprietary message in lieu of using a proprietary Alternate START Code.
More info on Manufacturer's ID field: http://www.esta.org/tsp/working_groups/CP/mfctrIDs.php
I've been spending a lot of time in the RDM standard lately, including http://www.rdmprotocol.org/forums/ , so I'm sensitized to such issues. I'm also pragmatic enough to know it won't matter but in a vanishingly small number of cases.
(yet another Don)
