I want to try this! Unfortunately, http://digwdf.com is currently out of stock!? :dry:
Few questions if you don't mind:
1. I have a built Renzilla finally working correctly with regular DirkCheapSSR's. If I get these, I pretty much don't even need the Renzilla because these are like mini controllers & relays (right?).
2. If I wanted to add these in addition to wired relays being controlled with the Renzilla, I imagine I would just address the PIC on the fourstick with the next address in line (address 13), setup everything for multicast with the correct firmware and hopefully everything works?
3. Are you going to have more in stock soon? Considering that this comes with wireless & is less than $4 more than the DirkCheap SSR's www.Radiant-Holidays.com is selling, this is a steal!
MarbeL wrote:I want to try this! Unfortunately, http://digwdf.com is currently out of stock!? :dry:Few questions if you don't mind:
1. I have a built Renzilla finally working correctly with regular DirkCheapSSR's. If I get these, I pretty much don't even need the Renzilla because these are like mini controllers & relays (right?).
Renzilla is the least expensive way to go of any controller on the planet. For <$200 you can have 96 channels of fully dimmable lights using a Renzilla and the DirkCheapSSRs. Going wireless with multiple controllers is almost always the most expensive way to go. You'd need 24 FourSticks to duplicate what you can do with a Renzilla and the DirkCheapSSRs ,and 24 FourSticks would set you back almost $600. What you gain with Foursticks is measured in three areas: (1) less physical cabling on the ground, (2) more flexibility in placing display pieces where you want them and (3) easier setup. But remember, it comes at 3x the cost.
2. If I wanted to add these in addition to wired relays being controlled with the Renzilla, I imagine I would just address the PIC on the fourstick with the next address in line (address 13), setup everything for multicast with the correct firmware and hopefully everything works?
Yes, that's one way to do it but a simpler way is to leave the FourStick PIC's address at 1 and use the ESP firmware to choose the starting channel -- you'd set it to start at channel 97. The ESP makes it a cinch to change the channel remotely via your browser any time you want.
3. Are you going to have more in stock soon? Considering that this comes with wireless & is less than $4 more than the DirkCheap SSR's www.Radiant-Holidays.com is selling, this is a steal!
Yes, more boards are on order and I expect them within the next 5-7 days. But you're comparing apples and oranges. Remember, FourStick has only 4 channels. Radiant-Holidays sells a set of 4 DirkCheapSSRs (16 channels) for about $20. Four FourSticks (16 channels) will set you back about $100 -- that's a pretty big difference. And we will have only bare boards for the rest of this year -- no kits, sorry.
Thinking about replacing a bunch of my SSR’s with FourSticks next year. How are they addressed in Vixen 3, are they setup using the Streaming ACN (E1.31) controller?
Sent from my iPhone using Tapatalk
You set the PIC's start address to 1 and use the addressing capabilities of the ESP module to set the address and universe you need. You can use either Renard or RenardDMX.
Yes just like any other ESP based unit
The BOM has the 638-H11AA1 called out but that is out of stock at Mouser and requires a minimum order of 1040. Will the 782-H11AA1 work as well? It appears the main difference is the 782-H11AA1 is bi-directional input.
Yes, the 782-H11AA1 is fine. The BOM has been updated accordingly. Thanks!
Kits with and without the ESP module in the store.... while supplies last...

