Finally Affortable ...
 
Notifications
Clear all

Finally Affortable Snowfall Tubes (FAST)

448 Posts
68 Users
0 Reactions
263 K Views
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago
lizard050 wrote:Not knowing anything about pcb design or pic programming - I was thinking about ordering 60 of these and making 15 each of red , grn, blue and white to cordinate with the rest of my show when it goes throught the color cycles. Then I thought surely some of the smart people here might just come up with a way to get mutliple colors in one tube for less $$ then the 60 seperate tubes. Just thinking/wishing out loud.

I personally don't see any RGB coming out of my area, i don't think cory has any plans to either. I'd say go with your aforementioned idea, or consider RGB pixels and/or strip.

my $.02


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
aususer wrote:wouldn't RGB move this from being "affordable"? The PCBs would be 3x the size.. the controller 3x the price..

I think it depends on how much control you want over the LEDs, which color combinations are needed simultaneously, etc.

There are various ways to add RGB. For example, if you only need one color at a time, it only needs 2 more control lines to get RGB instead of monochrome (per segment). I think I read that the current FAST firmware only turns on 1 LED at a time, so that limitation would not be a problem in this case.

I guess it also depends on the type of LEDs. For example, 5050 RGB LEDs are pretty small so they would probably not increase the PCB size. The 4-pin Piranha-style RGB LEDs are the same size as the monochrome ones, so the same would be true for those also. OTOH, if using discrete R, G and B LEDs, then I agree that would increase the PCB size significantly.

don


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago

What would be the desired number of pixels in an RGB version? (would it still be ~ 8 groups of 7, or some other quantity?) Would it only need to light a R, a G or a B, or would you want a color mix between R, G, and B?

Also, would it only need to light up 1 pixel at a time, or allow multiple pixels to be lit at the same time?

(sorry if this is straying off topic; it seemed related)

don


Reply
Posts: 255
(@lizard050)
Reputable Member
Joined: 19 years ago

Many displays include waves of color just using red, green, blue and white. So I was thinking of snowtubes that could be included with the color 'waves'. Or just waves among the snowtubes if there were enough of them in one tree. I wasn't so much thinking about color mixing. I like the idea of just applying power to a tube and the effect is created as designed. Simple and a lot of bang for your money. I also liked the idea of turning 1 channel on and getting the snow fall in white, then turning another chanel on and getting the snow fall in red, ect.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
lizard050 wrote:Many displays include waves of color just using red, green, blue and white. So I was thinking of snowtubes that could be included with the color 'waves'. Or just waves among the snowtubes if there were enough of them in one tree. I wasn't so much thinking about color mixing.

If you only want one color element of one pixel at a time, then the controller I/O pins can drive the LEDs directly as they do now (with a series resistor). OTOH, if you wanted to mix colors or have more than one LED on a time, that would require the addition of chipiplexing transistors - that's a minor change to the controller side of things and wouldn't increase its cost or complexity substantially.

I'm thinking that 90 RGB LEDs running off a 24-pin or higher PIC might be a good arrangement here, say 6 modules of 15 LEDs each connected in series like how the current version does (see first attachment for an example). If not that many are needed, then a smaller PIC or fewer I/O pins could be used.

EDIT: yes, 6 x 15 seems to work well:
http://doityourselfchristmas.com/forums/showthread.php?16955-Addressable-Dumb-RGB-Pixel-String-(Charlieplexed)

Attached is a schematic for 6 x 15 RGB charlieplexing, with notes for fewer or more LEDs. (second schematic; I had to rotate it to fit within the vBulletin limits, sorry about that). I didn't include the controller schematic, because it's basically the same as what is already documented, just more I/O pins.

don


Reply
Page 38 / 90
Share: