Countdown Clock
 
Notifications
Clear all

Countdown Clock

31 Posts
15 Users
0 Reactions
16.8 K Views
Posts: 16
(@donross)
Eminent Member
Joined: 19 years ago

Nathank,
This is an great idea
I would be very interested in your script.
The linux version would be suitable.
My idea of a countdown timer was a simple script and an old lcd monitor made weather resistant, and then embedded into a wooden sign.


Reply
Aurbo99
Posts: 2804
(@aurbo99)
Famed Member
Joined: 19 years ago

Ok, its been a while but I've finally made it back to my Countdown Clock Project.

All other electronic projects except the Ledtriks panel are now complete so I pulled this off my shelf and off the breadboard and just fired up the circuit a few minutes ago.

Quick overview;

1. A Countdown clock, or alternately a standard clock.
2. Temperature sensor, to display the ambient temp.
3. Battery backup.
4. D100,D10,D:H10,H1:M10,M1 display for 365 days 23 hours and 59 minute style counter, Its possible to go 999:23:59 for a 1000 day counter if your off your rocker.
5. INDEPENDANT of computer ties. Set it and forget it.
6. Scalable LED Segments, make them BIG or small..
7. Scalable Digits, just stop populating the board. 4 and 7 digit code will be available, other non-standard digit codes will be posted after.
8. Keep power consumption at 12vdc and 5vdc to allow for 7+9
9. SSROZ capability for the really stupid sized Segments using mini's or C9's.. Ya baby!

I've acheived 1-8 but I've not tested 9 yet as I just migrated the circuit off the breadboard and onto a quick and dirty home etched pcb. you can see the Vero-board LED segments in the pic I used on the Breadboard build-up.

The 4 pin connectors on either side of the drivers will likely remain as I think its overkill to add RJ-45's for only 4 pins plus + voltage that would require 14 RJ-45's on the pcb making it rather large.

The PCB is 3x8" but with a little tweaking the whole pcb could be crunched down to a 3x5"

Work still to be completed.
A. Coded up and running, but I still need to convert to 'F for the non-'C folks.
B. Work on a double sided PCB to reduce overall size.

Possible alterations,
A. Add a jumper to change from count-down to count-up mode.

And finally, The Arctic wolves puppy-power pack. The Pups are out of the den and are following the trash-truck all over the station.. we now have 12 wild Arctic wolves tracking you aroud the station.


Reply
Posts: 121
(@vairmoose)
Estimable Member
Joined: 19 years ago

Looks Marvelous... (getting the mind rolling on possibilities)...

Larry


Reply
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago

WOW!!! That looks great Steve. I love seeing these new designs.


Reply
kostyun
Posts: 2178
Guest
Topic starter
(@kostyun)
Member
Joined: 20 years ago

Looks great - Can't wait to see a Co-Op happen on the PCB!


Reply
Page 6 / 7
Share: