I'm a hardware guy. I've got 3 ea Renard SS24 & SS8 finished and almost mounted in enclosures with cords coming out. I have an FM transmitter ready to go and I've downloaded the sequencing tips. I've assigned lights to the various channels. I know you set up the sequence in Vixen in 50 msec segments and assign a beat track.
Once I select and download the songs I want to use then I'm kind of lost.
How do you follow the beat of the song as you set up the sequencing?
Does it play very slowly as you program or what?
Just not sure how to get started on this phase of things.
So any helpfull clues here would be much appreciated.
This forum is great!
Jack
Let's say you're just using the SS24 and 24 channels as an example.
You'd actually set up 25 channels in Vixen (1 more than you'll actually control with the controller). This extra track is called the "beat track."
Then you create a new sequence, and if you use the wizard, select the song to which the sequence belongs.
After you get to the main screen again, if you can play the song and watch the vertical bar scan across the screen, then you've successfully linked the song to the sequence, although it doesn't do anything yet.
So put your cursor on the first cell of your beat track, and click the button to start playing the song. Whenever you get to a "beat" press the spacebar on your keyboard and that cell will be painted. Each time you press the spacebar, another cell is painted. You run through the song, pressing the spacebar whenever a beat is heard. Thus, you end up with a beat track that has a colored cell at every beat of the song.
Some members use more than one beat track -- it's up to you. Some use one track for horns, one for a bass guitar, one for a vocal, one for drums, etc. The beat tracks don't control anything -- they are just visual indicators of when the beats of the song happen, and in so doing, they aid your sequencing the various OTHER tracks for on/off, ramps up/down,etc.
Have fun with it. It's the most time-consuming part of this hobby, so be sure to have plenty of coffee available to keep your eyes open!!!
Once you have your sequence created in the "Sequence Wizard", open the sequence and click on "Audio", "Assign Audio", click on the "MP3" you want to assign to that song, click "Open", then down near the bottom of the screen, you will see a group of channels in a window(that are in your sequence). Select one of them for the Beat Track by clicking on it (it can actually be any one of them, but we usually designate one or more of them to be a Beat Track when creating a Profile) and then click on the little right arrow (>) just to the right of that group of channels. You will then see a green bar start to count down - when it hit's zero, your song will begin playing. Use either one of the Control Keys to tap out the beats that you want to use. Once the song ends, click on "OK", and your beat track will show up on whatever channel you selected. I usually end up playing the song a time to two (or ten) before starting to create the Beat Track. (If you don't let it play thru to the end, and click on "OK" you have to start over again). You can then play the sequence and tune it up (you are bound to miss a few beats, or want to adjust them, do that by using the space bar while the sequence is playing back). Using the Audio Visualizer can be a big help at this point. Have fun!
Thanks guys that will be a big help to get me started. Question: I have 96 channels assigned, but have a few empty channels inbetween things. Should I assign channel 97 as my beat track? In other words do you always use the next higher channel then what you actually use?
Jack
Not necessarily. Many folks add a channel or two, because they are using all of their channels and have no spares. I have a few unused channels too, so I just use one of them for a Beat Track. You can use any unused channel for a beat track, or create several if you like, spaced so that there is one visible all the time on your sequencing window (saves having to scroll up to see the beats........) just put your cursor on the channel you want to copy (in this case, your Beat Track) Right Click on it, choose "Copy full channel events to clipboard", then move your cursor to the channel you want to copy to, again Right Click and select "Paste full channel events from clipboard". Whatever was on the first channel is fully copied to the channel you selected.
