Help with Layout! P...
 
Notifications
Clear all

Help with Layout! Please!

12 Posts
4 Users
0 Reactions
4,366 Views
Posts: 209
(@kdoyon)
Reputable Member
Joined: 11 years ago

Cool.

As far as advice, I am in my first year too, however I do have a light design background. Add up all of the strings you have used in the past. If it is 24 or less channels, then let each string be individually controlled. If it is more, then you will have to decide where to group. Try to think in terms of strings and groups of strings. Sometimes you want some single strings that can light up alone but that can also light up with their group. For example, the left side of the garage door, the right side, and the top could all be separate strings, and chase around in circles, but could also all come on together for more emphasis.

Good luck! Maybe I can come by and see it the show this year.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

roof done in sections bushes done each tree done garage windows outline yard corners of house done separate

Screenshot 1

Reply
Posts: 110
Topic starter
(@brant78)
Estimable Member
Joined: 10 years ago
TazChaLet wrote:roof done in sections bushes done each tree done garage windows outline yard corners of house done separate

>

Man that is freaking cool! Thank you very much! I have a few more things to add but this is a great start. I have vixen 2 and 3 and I think I’m gonna just download some preloaded sequences and buy the music because the sequencing will take me too long to get done.

How does everyone run the wiring from their roofs to the controller?

How long can the runs be?

Sent from my iPhone using Tapatalk


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

you are using just regular lights so you can make extension cords using spt wire and vampire plugs me myself use old christmas lights strings


Reply
Posts: 34
(@marknbacon)
Trusted Member
Joined: 11 years ago

Brant, This is my second year. I started with 24 channels last year, and let me tell you, it was something else. You can do TONS with 24 channels.

Last year, I did the following on seperate channels:
roof peaks
roof valleys
roof edge
roof "panels" (my roof had 4 sections visible from the road, so I just lined the roof with LED strings about 2-3 feet apart)
Corners of the house
around the doors/garage/windows (each seperately)

Then I did some yard elements, like I made "mega trees" out of several long LED strings attached to PVC and stood them up (6 of them total), and I had 5 channels of mini trees that I made out of tomato cages and multi-colored LED strings that I converted to single color (if you decide to do that, please do your research before you jump into plucking LED bulbs... or PM me and I can give you an idea of what goes into it)

But all that being said, from what you said, I would do the roof peak, edges, and any valleys that you have (Picture didn't load for me, so I don't know what it looks like. Sorry.) you could do each edge as a separate channel if you have enough. The bushes would be cool as separate channels, down the drive ways each side, and across the front.

How I envision my display is basically anything that is "separate" can have its own channel. As kdoyon said, if you start running out of channels, you'll have to step back and look at what would look OK being grouped together (mind your current draw however! All LEDs don't draw that much, but they do add up fast! and Incans are even worse.)

Good luck!


Reply
Page 2 / 3
Share: