Do It Yourself Christmas Forums  

Go Back   Do It Yourself Christmas Forums > General > Group Buys
Home Page File Library Christmas Wiki Newsletter Live Chat Member Map

Group Buys Group buys on parts/boards to save money for everyone

Reply
 
Thread Tools Display Modes
  #1  
Old 02-07-2010, 10:45 PM
fkostyun's Avatar
fkostyun fkostyun is offline
Member
Global Moderator
 
Join Date: May 2007
Location: Ahwatukee (Phoenix), AZ
Posts: 1,911
Default Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

Detals as are follows:

The Co-Op board cost will be $14.00 per board with a flat rate of $5.95 for shipping for up to 5 boards for the United States.

If multiple items are shipping at once, it will calculate based on the total weight.

If you wish to make a change to the quantity that you would like to recieve, please send me an email to frank (at) kostyun.com.

This CoOp will End Monday, March 1st. CoOp is for the bare PCB only.

Shipment out from me would be about two weeks after that, for a mid-to late March delivery.

Board Info and BOM
http://www.kostyun.com/current-projects/renard-24-lv/

Code:
Current Orders:
Code:
Current BOM: 

1 838-3FD-316 "Power Transformers 16VCT@0.15A 8V@0.3A Dual Primary"
4 571-1-390261-5 "IC Sockets 18P ECONOMY TIN"
4 511-ULN2803A "ULN2803A Darlington Arrays Eight NPN Array"1 
1 571-7969495 "Eurostyle Terminal Blocks 5.08MM VERTICAL 5P wire protector"
2 595-SN75176BP "RS-485 Interface ICs Bus Diff"
1 511-L7805CV "Voltage Regulators 5.0V 1.0A Positive"
1 821-DB102G "DB102G Rectifier Bridge 1A 100V
1 532-7136DG "Heatsink TO-220 VERT 19.7 TR"
3 271-27K-RC "1/4W 1% Metal Film Resistors 27Kohms 1% 50PPM"
4 271-1K-RC "1/4W 1% Metal Film Resistors 1Kohms 1% 50PPM"
1 271-120-RC "1/4W 1% Metal Film Resistors 120ohms 1% 50PPM"
1 625-1N4001-E3 "1N4001 Standard Rectifiers 50V 1A"
1 78-1N5239B "1N5239B Zener Diodes 9.1 Volt 0.5 Watt"
1 78-1N5229B "1N5229B Zener Diodes 4.1 Volt 0.5 Watt"
1 782-H11AA1 "H11AA1 Optocouplers Bi-Directional Input"
1 520-TCF1843-X "Full Size Crystal Clock Oscillators DIP-14 5V 18.432MHz"
1 140-HTRL25V1000-RC "Radial Electrolytic Capacitors 25V 1000uF"
2 140-HTRL25V10-RC "Radial Electrolytic Capacitors 25V 10uF"
2 534-3517 "Fuse Clips and Holders PC FUSE CLIP 5MM"
1 504-GMA-15 "5mm x 20mm Fast Acting Fuses 125VAC 15A Fast Acting"
3 579-PIC16F688-I/P "PICmicro MCUs 7KB 256 RAM 12 I/O"
4 604-WP63ID "LED Standard HI EFF RED DIFFUSED" 
2 604-WP1503GD "LED Standard GREEN DIFFUSED"
5 271-680-RC "1/4W 1% Metal Film Resistors 680ohms 1% 50PPM" 
5 581-SA105E104MAR "Axial Ceramic Capacitors 50volts 0.1uF"
1 571-9-146281-0 "AMPMODU Breakaway Headers 40 P HEADER GOLD"
7 571-2-382811-1 "AMPMODU MOD. IV Connectors ECONOMY SHUNT"
2 571-1-390261-2 "IC Sockets 8P ECONOMY TIN"
3 571-1-390261-3 "IC Sockets 14P ECONOMY TIN"
2 571-1-390261-1 "IC Sockets 6P ECONOMY TIN"
8 571-5556416-1 "Modular Jacks 8 PCB TOP ENTRY"
Group Buy Rules and Other Various Legal Mumbo Jumbo

By participating in this Group Buy all participants agree to release www.doityourselfchristmas.com, its Owners, Administrators, Moderators or any other staff of any and all liability and waive all rights I may have under all laws and governing bodies. By posting in this thread you agree you are entering a binding contract between the Organizer and the Participant.


To Order please visit: http://store.kostyun.com (I believe I have it all fixed now!)
__________________


Sponsor me for in the Bike MS: Round Up Ride!

The Kostyun Christmas Store . All about the Boards . Follow us on Twitter!

*Please note: No formum access from work - PM's will be delayed in response.

Last edited by fkostyun; 02-10-2010 at 08:58 PM.
Reply With Quote
  #2  
Old 02-08-2010, 03:23 PM
folksy folksy is offline
Supporting Member
 
Join Date: Dec 2008
Location: Camden, NC
Posts: 61
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

Ordered two from your site.

Thanks Frank,

Could you tell me if the below BOM is what is needed to power my Mighty MINIs I also ordered from your site. I have already ordered an external pwr supply from www.circuitspecialists.com

This note left me a little confused.

"For using with 18v and above power inputs, part xxx-xxx-xxx from Farnell is the recommended voltage regulator. It will allow for 18v to 36v inputs with no excess heat on the regulator."

Last edited by folksy; 02-08-2010 at 05:48 PM.
Reply With Quote
  #3  
Old 02-08-2010, 06:16 PM
RichF's Avatar
RichF RichF is online now
Supporting Member
 
Join Date: May 2007
Location: Virginia Beach, VA
Posts: 795
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

I am in for 8 ordered and paid
__________________
616 Dimming Channels
12 Ren-24s
13 Ren-24lvs
2 Ren-8ss
.2mW FM transmitter w/rds
More light bulbs then I care count.
http://www.vimeo.com/user1106747/videos
Reply With Quote
  #4  
Old 02-08-2010, 08:38 PM
Skunberg Skunberg is offline
Member
 
Join Date: Jan 2009
Location: Eagan, Mn.
Posts: 239
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

Ordered 2 from your site and payed.
__________________
2009 - 48 channel MegaTree 4800 lights
plus 3200 lights static display.

2010 - 104 channels of ???
Reply With Quote
  #5  
Old 02-08-2010, 11:24 PM
Dragon88 Dragon88 is online now
Member
 
Join Date: Dec 2009
Location: NorCal
Posts: 85
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

Ordered 4 and paid from your store.
Reply With Quote
  #6  
Old 02-09-2010, 03:05 AM
mikeh65 mikeh65 is offline
Member
 
Join Date: Dec 2007
Location: Lombard, IL
Posts: 80
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

Well, if these are in, then I think my order it complete. One, Renard 23 LV and 5 Mighty Mini floods. Already ordered and paid for.
__________________
Grinch for 64 channels (2008)
RenXC (2) for 128 channels (2009)
RenXC (2) and Ren24LV for 152 channels (2010)
Reply With Quote
  #7  
Old 02-09-2010, 08:35 AM
kychristmas's Avatar
kychristmas kychristmas is offline
Supporting Member
 
Join Date: Dec 2008
Location: Ft. Mitchell, KY (Cincinnati Area)
Posts: 786
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

2 Ordered and Paid for.

Thanks Frank.
__________________
Formerly kjburns31
Completed Basic Display in 2009 (20K Lights and 190 Channels)
1-Ren 64XC, 4-Ren 24s (Franks), 4-Ren 16s (Xmus)
www.Kentucky-Christmas.com
Reply With Quote
  #8  
Old 02-11-2010, 04:03 PM
WireWrap WireWrap is offline
Member
 
Join Date: Dec 2008
Location: Pensacola, FL, USA
Posts: 641
Thumbs up Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

One ordered & paid.
__________________
Longfellow said that in this world a man must be either anvil or hammer.
But some are neither, they are merely bellows.
Reply With Quote
  #9  
Old 02-16-2010, 12:32 PM
theoldgeezer's Avatar
theoldgeezer theoldgeezer is offline
Supporting Member
 
Join Date: Jan 2008
Location: Flat Rock, NC
Posts: 33
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

Is there a Board and Parts coop planned?
__________________
It's just a jump to the left!
Reply With Quote
  #10  
Old 02-16-2010, 12:37 PM
jonedwste's Avatar
jonedwste jonedwste is offline
Supporting Member
 
Join Date: Jan 2010
Location: Lincoln, California
Posts: 112
Default Re: Renard 24 LV 2.0 CoOp - Ending March 1st, 2010

This is for the board only, I believe RichF is currently running the parts buy. From what i've heard, there are no plans for the combo. Rich's price on the parts is pretty GREAT!
__________________
my List: (to do, done, ideas...)
  • 1 - Renard 24 SS (9 more to go, have all, just need to build)
  • LED icicles all hacked into short 3-4' sections for chasing, building an easy installation for these
  • on it's way 1000' of weather x zip wire-18g, green, Thanks Paul(CDI)!
  • on hand: 50 strings of 100ct clear lights
  • on hand: 50 strings of 100ct multicolor lights(ready to cut to 50ct's and swap bulbs for single colors, YIKES!)
  • on hand: 1000' weather-x zip wire, 18g, white(ready for projects)
  • 4 arches assembled and painted, 3 waiting for lights and 1 lit up!
  • 2 - Renard24lv pcbs & boms on hand, ready to build
  • 7 portaflood pcbs on hand, 1 enclosure on hand, 1200 LED's ordered
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:51 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.