Page 4 of 4 FirstFirst ... 234
Results 31 to 37 of 37

Thread: Any plans for a co-op or even a beta board order?

  1. #31
    Join Date
    May 2007
    Location
    Tulsa, Ok
    Posts
    428
    Post Thanks / Like

    Default

    The power jack part number is wrong. The BOM indicates 806-KLDX-0202-B but it should be 806-KLDX-0202-A

    Sorry for any troubles, I am not sure how that happened.

    ---EDIT: Attacment deleted, see updated BOM---------

  2. #32
    Join Date
    May 2007
    Location
    Tulsa, Ok
    Posts
    428
    Post Thanks / Like

    Default

    The description of the PIC18F4525 was wrong in the BOM_r3 so I have revised it to BOM_r4.

    ---EDIT: Attacment deleted, see updated BOM---------

  3. #33
    Join Date
    May 2007
    Location
    Tulsa, Ok
    Posts
    428
    Post Thanks / Like

    Default

    Bassboy had a problem with his FGDimmer system. We worked on it and we discovered that the SSR he was using needed the controller to sink the voltage to turn on the SSR. My personal SSRs need the controller to source the voltage to turn on the SSRs.

    I can/will make a program to sink the voltage but the module selection may need to be programmed into each 18F4525 I/C.

    Here is the importaint part: when installing the LED's, make sure you install them in the correct direction for your SSR's.

  4. #34
    spike Guest

    Default

    It is Sean's SSR's that will require the new program. Or any other 5v common instead of common ground system.

  5. #35
    Join Date
    May 2007
    Location
    Melbourne, Australia
    Posts
    1,079
    Post Thanks / Like

    Default

    90% of the SSRs out there in this forum will be 5V common. THe GRINCH, RENARD, and Olsen Controllers are all configured that way.
    [B]John[/B]
    [url]www.xmasinmelb.com[/url] General Site
    [url]www.xmasinmelb.com/zencart/[/url] Online Store

    [SIGPIC][/SIGPIC]

  6. #36
    spike Guest

    Default

    We are about done making a fix for the firegod system.

    The Olsen boards I have work on the common ground....

  7. #37
    Join Date
    May 2007
    Location
    Tulsa, Ok
    Posts
    428
    Post Thanks / Like

    Default

    1-4-me-2 found yet another BOM slip up. On the PC interface, R1,R4,R7, and R10 were called out as R6.

    See the revised BOM_r5

    Sorry for any trouble it may have caused.
    Attached Files Attached Files

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •