Page 1 of 6 123 ... LastLast
Results 1 to 10 of 59

Thread: Renard SS Group Buy

  1. #1
    Join Date
    Oct 2011
    Location
    Marietta, GA
    Posts
    254
    Post Thanks / Like

    Default Renard SS Group Buy


    GROUP BUY IS CLOSED
    Parts Group Buy for the Renard SS (Standardized Series) by WayneJ

    Interest thread was only for around 80 BOM's so cost is a bit more than past years. Really need to have ~200 BOM's to get the previous pricing which we aren't close on.
    If we get less than 70 BOM's I will cancel the group buy as I will need to alter the pricing.


    LEGAL ITEMS

    Group Buy Rules: Read before posting in this thread!

    You must be a "Supporting Member" to Participate in this Group Buy per the forum rules. It is $20 for one year. If you order just 1 SS24 kit you save over $40. The reason you must be a supporting member is to help fund hosting cost for DIYC. With out DIYC you would not have found this Group Buy and you would not be able to get the huge savings that the Group Buys offer.

    You can become a Supporting member by clicking "Settings" in the upper right of the page, and then "Paid Subscriptions" in the "My Account" menu on the left. Participation in all Group Buys will require you to be a Supporting member. By participating in this Group Buy all participants agree to release www.doityourselfchristmas.com, its Owners, Administrators, Moderators or any other staff of any and all liability and waive all rights I may have under all laws and governing bodies. By posting in this thread you agree you are entering a binding contract between the Organizer (heldwhat Christmas) and the Participant.

    Group Buy Rules can be found here.

    This Group Buy will have a maximum of 50 participants or a total BOM count of 200.

    All Pics will be programmed with the latest firmware and PWM enabled. If you don’t want and programming, that means you most likely have a PicKit or other programmer and you can just reprogram the pics when you get them.
    The Spare Parts Kit will contain 2 PIC’s, one with the operating firmware and the other with the Diagnostic firmware.


    COST

    Renard SS 8 BOM $32.25
    Renard SS 16 BOM $45.50
    Renard SS 24 BOM $56.00

    Renard Spare Parts Kit BOM $15.00
    Replacement TRIACS BTA06-600CW $0.55ea. (you do not need these if you purchase the BOM's. This is only for people with older SS boards and would like to upgrade existing boards)

    Renard SS 8 PCB $7.20
    Renard SS 16 PCB $9.20
    Renard SS 24 PCB $12.50

    Renard SS 8 Heat Sink $2.00
    Renard SS 16 Heat Sink $2.00
    Renard SS 24 Heat Sink $2.25

    PayPal Fees: 3% plus $0.30


    SHIPPING


    Shipping will be as follows it includes price for all packing bags, labels, tape, etc..:

    1 of any BOM only $7.50 (Small Flat Rate Box)*
    1 to 2 SS8 or 2 SS16's with PCB's and Heat Sinks $7.50 (Small Flat Rate Box) the SS24 heat sinks and PCB's are too long
    up to 8 BOM's, PCB's, & Heat Sinks of any SS controller $14.00 (Medium Flat Rate Box)
    9-16 BOM's, PCB's, & Heat Sinks of any SS controller $19.25 (Large Flat Rate Box)

    Canada Post was around $42.00 as a gift for a Medium Flat Rate Box


    BOM

    BOM.png
    Parts substitutions, if required, will be per the Part Substitutions List found in the wiki or from the Group Buys James has done in the past.


    ORDERING INSTRUCTIONS

    Reply to this post with the number of:

    Renard SS 8 BOM
    Renard SS 16 BOM
    Renard SS 24 BOM
    Renard Spare Parts Kit BOM
    BTA06-600CW's

    Renard SS 8 PCB
    Renard SS 16 PCB
    Renard SS 24 PCB

    Renard SS 8 Heat Sink
    Renard SS 16 Heat Sink
    Renard SS 24 Heat Sink

    That you want and I will update this thread with a spread sheet that includes your total cost. You will need to review your order and if it is what you want make your payment via PayPAL.




    PAYMENT

    Once I've shown your total on the spreadsheet, payment is to be sent to nevadadolfan@yahoo.com via PayPal.

    Please include your DIYC Screen name. Payment is expected no later than 2 week once the ordering period has closed. If the Group Buy doesn't sell out, it will close on March 18, 2016 and parts will be ordered.


    ORDER STATUS

    Updated the Spread sheet: 3-30-16 20:34 EST
    orders.png
    Make sure your order is correct and pay that amount shown. If a correction needs to be made, just post it to the thread.
    Last edited by Heldwhat Christmas; 03-30-2016 at 08:35 PM. Reason: updating order status
    -Chris

    2012: 3 Renard SS24's for 72 channels... 6236 lights... powered by HLS
    2014: 3 Renard SS24's, 1 SS16, 2 REN RGB+w, 1 E6804, 32 FAST tubes... 7,000+ lights & 200 pixels... powered by FPP & HLS

  2. #2
    Join Date
    Dec 2014
    Location
    Langhorne, PA
    Posts
    535
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    Count me in for:
    2 x SS24 BOM
    2 x SS24 PCB

    Thanks again for putting this together!!

    Mark
    2014 - pretty basic static display
    2015 - lots of Blinky Flashy
    5 x Renard SS24
    2 x Renard SS16 for singing trees
    2 x e682 for around 2000 pixels
    2016 - Up to around 12,000 pixels and still wanting more.

  3. #3
    Join Date
    May 2007
    Location
    Robbinsville, NJ
    Posts
    1,536
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    1 x SS24 BOM
    1 x SS24 Heat Sink
    1 x SS16 Heat Sink
    5 x extra TRIACS

    Thanks
    Last edited by michaelc; 02-23-2016 at 03:04 PM.
    Michael



    New for 2016: Getting my ESPixel network to function, 4 HDPE Pixel Arches, Pixel matrix on tree trunks. PIXELS!!!
    FACEBOOK: https://www.facebook.com/GothambeatProductions?fref=ts

    Gotham Beat Productions LLC

  4. #4
    Join Date
    Dec 2013
    Posts
    79
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    3 x Renard SS 8 BOM, PCB, & HS
    2 x Renard SS 16 BOM, PCB, & HS
    2 x Renard SS 24 BOM, PCB, & HS

    Thanks for putting this together!

  5. #5
    Join Date
    Dec 2015
    Location
    Conway South Carolina
    Posts
    126
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    2x Renard SS 16 BOM, PCB & HS

    Thanks

  6. #6
    Join Date
    Dec 2007
    Location
    Gaines, PA
    Posts
    73
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    I would like:

    4) SS24 BOM
    4) SS24 PCB
    4) SS24 Heat Sink

    Thanks!
    Visit us at [URL="http://www.bluemountainlights.com"]BlueMountainLights.com[/URL] or [URL="https://www.facebook.com/BlueMountainLights"]Facebook[/URL]

  7. #7
    Join Date
    Aug 2015
    Posts
    36
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    2) Renard SS 16 BOM, PCB & HS
    Have been waiting for this one.

  8. #8
    Join Date
    Nov 2015
    Posts
    17
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    2 x Renard SS 8 BOM, PCB & HS
    2 x Renard SS 16 BOM, PCB & HS
    1 x SS24 HS
    1 x Spare Parts Kit
    5 x BTA06-600CW's

    Thanks!
    Last edited by FrankP123; 03-17-2016 at 02:18 PM.

  9. #9
    Join Date
    Feb 2014
    Posts
    22
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    2 x Renard SS 8 BOM, PCB, & HS
    2 x Renard SS 16 BOM, PCB, & HS

    Thanks for setting this up!
    Just getting started for 2016!!!

    16 LOR Channels & 128 Renard SS24 Channels
    Should have 20,000 lights this year!

    [url]https://www.facebook.com/gebhardtfamilylights[/url]

  10. #10
    Join Date
    Dec 2013
    Location
    Kenai, Alaska
    Posts
    77
    Post Thanks / Like

    Default Re: Renard SS Group Buy

    I would like:

    1) SS8 BOM
    2) SS24 BOM
    2) SS24 PCB
    2) SS24 Heat Sink

    Thank you for making this happen!

    Thanks!

Page 1 of 6 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •