MOUSER EZ-Buy BOMS

[Aurbo99]

Updated on 11 Jan 2011

Send me a PM if any part goes obsolete or an update is needed.

SSR's

SSROz x1

DCSSR x1 (updated 13Jan2011)

SSRez x1 (updated 11Jan2011)

Controllers

Grinch

Ren-C

Ren-T

Ren64 XC5

(Xmus) Ren16

Olsen 595 fully loaded

Olsen 595 minimal setup


Renard SSx series controllers

Renard SS 8

Renard SS 16

Renard SS 24


LEDTRIKS

Franks Panels Pending

Ledtriks

Triks-C




More to follow or just add on as we go..

[ukewarrior]

F A N T A S T I C.

This is way better then taking a BOM from the wiki, inserting the vertical bar character and then pasting it into mouser, AFTER you have logged on!

very very good.

Thank you.

one suggestion... why don't we just put 100 as the quantity for all 1/4 watt resistors.
For example, the SSRoz needs 5 resistors at .12 each for 60 cents. *OR* 100 of them for 1.00 !

[Aurbo99]

The links are for exact counts as listed in the Wiki BOMS..

I look for those savings when I order knowing its good to have spares.

While there are many savings by "up-sizing" the order such as you listed, it would make it nearly impossible to make a direct comparison as to price for each unit.

For now, getting accurate up-to-date Boms for quick reference is what I'm doing. =)

[ppohlman]

one suggestion... why don't we just put 100 as the quantity for all 1/4 watt resistors.
For example, the SSRoz needs 5 resistors at .12 each for 60 cents. *OR* 100 of them for 1.00 !

If you do that on each SSR and then you order the project 32 times, then you'll being ordering 3200 resistors instead of only 160.

Quantity break points is definitely something that EVERYBODY should look at when ordering parts.



***** EDIT ****
Looks like you beat me to the reply Aurbo99.

[rstehle]

Just trying this out to see if it works..

The "share" option on the mouser page.

Not sure how long these projects remain valid to share.

Correct as of 19Jan09

SSROz x1

Ren-C <-- Thanks to RichF for providing the link.

Ren64 XC5

Grinch

Xmus Ren16 NOT COMPLETE!

Ren-T


More to follow or just add on as we go..

Those are great! Just a quick note that the BOM's for the SSR and the REN 16 both show the older number for Triacs, and not the newer one that is more sensitive (for using LED's) 511-BTA04-700T.

[Aurbo99]

rstehle,

BOMS upgraded.. but the Ren16 still has a few obsolete errors that need to be fixed. Once I track them down I'll update it as well.

[kenl92]

I think this should be a wiki entry!
I will be willing to put it up if you want i already have an account.

[tjetzer]

Here is the current BOM for the Renard 24

[bmcgeeny]

Here is the current BOM for the Renard 24

That is A BOM for the Ren 24, not THE BOM. There are many options and I have one that is quite a bit different. So if you are ordering your own parts, make sure you review all the options.

One thing is this BOM has the top entry rj45 jacks. They do not fit in my enclosures. Most are using the 700T triacs for LED's but some still want the 400T for the higher amps. And the 35 degree screw down terminals work well and are a little cheaper, but we have used the stacked ones just as well.

Once you click the BUY button from Mouser it can get expensive if you need to change or buy a couple missed parts.

[bmcgeeny]

Here is the current BOM for the Renard 24

Also a much more serious error is the BOM shows 24 680ohm resistors. There are 29 on the board.