Results 1 to 3 of 3

Thread: Power Supply mounting

  1. #1
    Join Date
    Dec 2013
    Location
    Springfield MO
    Posts
    61
    Post Thanks / Like

    Default Power Supply mounting

    This will be my first year running anything DC. I have 2 Meanwell LRS 150 24 power supplies I need to mount and enclose. I have a spare Cable Guard CG 1000 5 port that they will both fit inside but the mounting holes do not match up. Thoughts on mounting some thin plywood to the inside of the box and then mounting the units to that?
    I used to mount my meanwells that ran my LEDs on my fish tank to plywood under the tank, but there was alot more space under there.

  2. #2
    Join Date
    Jan 2013
    Location
    Henderson, Nevada
    Posts
    896
    Post Thanks / Like

    Default Re: Power Supply mounting

    I usually get Dollar Store cutting boards and make mounting plates out of them.

  3. #3
    Join Date
    Jan 2012
    Location
    Chambersburg, PA
    Posts
    1,356
    Post Thanks / Like

    Default Re: Power Supply mounting

    go to www.jdeation.com. You can lay out the entire interior of a controller and then either order one or print out a pattern you can use on plywood or plexiglass to make your own. I also love the plastic Ammo Crates like the MTM AC30C-11 Ammo Can on Amazon. JDeation has that in their choices of enclosures as well.

    HTH,
    2012 - 1st year 64 Channels - 7500 LED lights - 5 sequences
    2013 - 128 Channels - 10,000 LED lights - 7 sequences (2 New)
    2014 - 201 Channels - upgrading 8 Arches to dumb RGB - 8+ sequences (1+ New)
    2015 - 240 Channels + 8 Universes - sequences TBD
    2016 - No Display
    2017 - Back in the Game - 240 Renard Channels + 12 Universes
    2018 - 256 Renard and 9 Falcon Outputs of Pixels - 16 sequences shown over 2 nights
    2019 - 256 Renard and 9 Falcon Outputs of Pixels - 16 sequences shown over 2 nights
    2020 - Emergency Conversion to Falcon F48 with limited wireless
    2021 - 10 RHL Simple Pi Pixel Controllers - 1 Master with 9 Remotes

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •