Vixen and Arduino Mega + inexperience

[MikeKrebs]

If you put a sdcard on the esp32 and are running firmware 4, then the sdcard will be available via the gui. You would copy your sequences (in sparse fseq format) to the sdcard and put espixelstick in player mode. This part of the Wiki explains how to play from the card:

https://github.com/forkineye/ESPixel...ote--play-fseq

[Gabry59]

Hi, I got the paper holder, connected it and prepared a small sequence.
The sequence has been saved on paper.
At the time of operation the sequence did not work and the flashing of the string seemed random.
I disconnected the card and I connected a string of 50 leds WS2811 and I launched the application XLIGHTS but the leds turned on so not in accordance with the sequence set.
Has it happened to anyone?
Thank you G59

[MikeKrebs]

Show us the config and maybe we can see something with the way you have them setup. When you change from SDCard to E1.31, you need to change the config.

With xLights, I believe you can see that the ESP connected and you can send down the config.

[Gabry59]

Hi, these are the settings of the ESP32.
Today he does not want to accept the memory card.
G59

[Gabry59]

Hi, these are the settings of the ESP32.
Today he does not want to accept the memory card.
G59

Attachment 46815
Attachment 46816

[Gabry59]

Hi, I can't see the memory card anymore.
The links I made are:
Memory card ESP32
Gnd Gnd
Vcc 5V
MISO GIOP19-MISO
MOSI GIOP23-MOSI
SCK GIOP18-SCK
CS GIOP5-SS
If anyone has any ideas to solve the problem.
Thanks G59

[Gabry59]

Sorry, I moved the Gnd of the memory card from one point of the SP32 of gnd to another point of gnd and it started to work.
With Google I connect to ESP32.
The memory card is about 500 MB and has been formatted with FAT32.
Wwhat and how to configure XLIGHTS the memory card to insert a show.
I'm using ESPixelStick 4 beta
Thanks G59