Page 5 of 5 FirstFirst ... 345
Results 41 to 43 of 43

Thread: FPP PB16 Controller

  1. #41
    Join Date
    Sep 2013
    Location
    Norwalk, Iowa
    Posts
    468
    Post Thanks / Like

    Default Re: FPP PB16 Controller

    Quote Originally Posted by rayhjr View Post
    Last year I reworked my Desk (Test) set up. I figured it was not going to be out in the changing temps in the yard so I tried a off brand SD card.
    It would boot up and as I was going through the setup and Rebooting, I would loose it. The router would see it but I could not Bring it up.
    After several tries, erase card, put new image on card, and start the process again, I gave up. Used Name Brand A2 U3 Card and problems went away.
    Ric Harris said on FB " In our use, an Application Performance Class is actually more beneficial. look for A1 or A2 cards" in answering a Question I ask about Card Speed.
    Just sharing my experience with a sup Par SD Card. YRMV
    Do you recall where you got the first card?

  2. #42
    Join Date
    Mar 2015
    Posts
    636
    Post Thanks / Like

    Default Re: FPP PB16 Controller

    Quote Originally Posted by jllracer55 View Post
    Do you recall where you got the first card?
    Bad card? No sir I don't.
    I do remember adding a card to a AliExpress order once, might have been that one.
    Most Name Brand class 10 A1 cards should be good though.
    I buy Sandisk off Amazon.

  3. #43
    Join Date
    Sep 2013
    Location
    Norwalk, Iowa
    Posts
    468
    Post Thanks / Like

    Default Re: FPP PB16 Controller

    I am not sure if it was just strickly the different card, but between a different card and reseating the pockebeagle board to the PB16 it finally booted up! With version 6.0.

Page 5 of 5 FirstFirst ... 345

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •