Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Mysterious Breaks

  1. #11
    Join Date
    Mar 2012
    Location
    Lebanon, Illinois, USA
    Posts
    3,331
    Post Thanks / Like

    Default Re: Mysterious Breaks

    OK. We had a third one split last week. They are sitting in my driveway, in an enclosed trailer. Temps here have been all over the map, but this is normal here. These things have lasted many-a-year.

    I need to know if anyone has a source for 2" white, in stock. I believe it is HDPE, but not sure of that anymore. We have decided to rebuild the broken ones, and create a few spares (just in case). Heck, it has been so long since we built these that I don't have a clue as to where to get the tubes today. Coils are preferred over sticks. We have bases and crossbars. May have to order some strips (10/30, 12vdc, WS2811) as well.
    Live, Laugh, Love.

  2. #12
    Join Date
    Nov 2007
    Location
    Houston, TX (near Katy)
    Posts
    1,083
    Post Thanks / Like

    Default Re: Mysterious Breaks

    Al,
    McMaster Carr https://www.mcmaster.com/ldpe-tubing/

    I have included two screen shots. The 50375K64 number is what I ordered in 2015. Sorry this happened to you. Good Luck. Be sure to call them about the shipping prices before ordering so that you don't get a shock.
    Keith
    Attached Images Attached Images
    That's a feature not a bug.
    There's no charge for that.

  3. #13
    Join Date
    Dec 2007
    Location
    New Mexico
    Posts
    4,074
    Post Thanks / Like

    Default Re: Mysterious Breaks

    Yes, shipping is a 'B'. As I recall, one of our members that lives in Washington State did a group buy which helped defray the high shipping costs. He split it up in 10' lengths and sent it on to each member of the group buy. I think most folks drove to his place and picked it up.
    That stuff still shouldn't have split with that little use.....

  4. #14
    Join Date
    Mar 2012
    Location
    Lebanon, Illinois, USA
    Posts
    3,331
    Post Thanks / Like

    Default Re: Mysterious Breaks

    Thanks folks.

    BTW - rstehle, these are NOT the ones that came down the mountain. These are the original, 2" pipes I have had since the beginning.
    What we refer to as the "Colorado Arches" are wider, I'm thinking 2.5", and haven't had any problems other than some of the strips going on vacation. No biggy.
    Live, Laugh, Love.

  5. #15
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    8,545
    Post Thanks / Like

    Default Re: Mysterious Breaks

    Most PE pipe is designed for underground usage. I wonder if this is UV degradation from being used above ground for several seasons. Sounds like the same clean breaks i get in the older pixel strip material.
    I've got several arches of the same material and vintage as yours and haven't had any breakage yet. But mine have yellowed a bit, not really noticeable on its own, but when i put it side by side with new material that's been inside, then it stands out.

  6. #16
    Join Date
    Mar 2012
    Location
    Lebanon, Illinois, USA
    Posts
    3,331
    Post Thanks / Like

    Default Re: Mysterious Breaks

    Interesting thoughts Jon.

    I need to temper that with the fact that for 10 months of the year they are in a 55 foot long shipping convex, hanging upside down (by the crossbar holding them together), and in the back where no light is found unless someone opens the doors. For 9 of those months, the only ones going in or out (and allowing the "sun to shine in") are PJ and me, and then for only a few moments and a few times.

    The stresses on any pipe in the ground include ground movement, which one would think would cause problems. These don't have any of that.

    I guess this whole thing falls into the category, "Things that make you go, hmmmmmmm."
    Live, Laugh, Love.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •