End of life notice

[Capt'n Jack]

I just received an "end of life" notice from Mouser for 512-FQPF13N06L MOSFET used in the REN24DC. Any thoughts for a replacement as I am still using that controller?

[P. Short]

I just received an "end of life" notice from Mouser for 512-FQPF13N06L MOSFET used in the REN24DC. Any thoughts for a replacement as I am still using that controller?

Most, if not all, parts in that OnSemi/Fairchild line are being discontinued, although that is such a ubiquitous part that I wouldn't worry about obtaining it into the near- to mid-term future. There are also a lot of more or less equivalent parts made by other manufacturers, such as the STP16NF06FP from ST.

BTW, are you still building those boards? If not, just order a few parts to replace any that die.

[wrongway]

Here is what I have been using. These are rated at 6 amps.
Wish I could find a source for the Tamura 3fs-312 transformer!
https://www.taydaelectronics.com/bta...c-600v-6a.html

[Capt'n Jack]

Thanks guys. I just replaced a couple and bought some extras for later, so I'm ok for now.

[P. Short]

Here is what I have been using. These are rated at 6 amps.
Wish I could find a source for the Tamura 3fs-312 transformer!
https://www.taydaelectronics.com/bta...c-600v-6a.html

Those parts are triacs, quite different from the parts that Capt'n Jack was asking about.

[dirknerkle]

Here is what I have been using. These are rated at 6 amps.
Wish I could find a source for the Tamura 3fs-312 transformer!
https://www.taydaelectronics.com/bta...c-600v-6a.html

Online Components has plenty of the 3fs-312 transformers:

https://www.onlinecomponents.com/en/...-12650803.html

[rayhjr]

I just purchased 10 of the Dual voltage from Mouser a month ago, 3FD-312.