Not sure if this helps since I don't have any,but I had to use some xchangers from wiredwatts so I could use a funny end with my Ray Wu extensions. They were called DIY to Ray Wu.
https://www.wiredwatts.com/xchangers
It doesn't look like there will be any extensions available from them this year. Has any found an alternative extension that will work for their standard ends?
Thanks, Ben
Not sure if this helps since I don't have any,but I had to use some xchangers from wiredwatts so I could use a funny end with my Ray Wu extensions. They were called DIY to Ray Wu.
https://www.wiredwatts.com/xchangers
(1)Falcon PI Player (Running the show)
(1) Kulp K8-B
(1) Kulp K32A-B
(1)Renard SS16
(1)Renard SS24
(1)EDM-LCD-CS-EP
(20)P10 Panels
(1152) Pixel Boscoyo Matrix
WIKI
Become A Supporting Member
Falcon Christmas
Renard Controllers
that would be an option, if i have to go that route.
I know you want to use their standard ends, but I have been using waterproof automotive connectors on all my props for almost 10 years now. They are available from a variety of vendors (amazon, ebay, aliexpress) and are interchangeable from the different vendors. I like them because I can make custom-length extension cables, they can be disconnected 1 handed even with gloves on during teardown, and allow me to purchase my pixels from a variety of vendors without worrying about what connectors they have in stock.
HTH
2012 - 1st year 64 Channels - 7500 LED lights - 5 sequences
2013 - 128 Channels - 10,000 LED lights - 7 sequences (2 New)
2014 - 201 Channels - upgrading 8 Arches to dumb RGB - 8+ sequences (1+ New)
2015 - 240 Channels + 8 Universes - sequences TBD
2016 - No Display
2017 - Back in the Game - 240 Renard Channels + 12 Universes
2018 - 256 Renard and 9 Falcon Outputs of Pixels - 16 sequences shown over 2 nights
2019 - 256 Renard and 9 Falcon Outputs of Pixels - 16 sequences shown over 2 nights
2020 - Emergency Conversion to Falcon F48 with limited wireless
2021 - 10 RHL Simple Pi Pixel Controllers - 1 Master with 9 Remotes
I have been asking DIYLEDExpress for 3 years for extensions. They finally got back to me this year and said they will look and see if they have any. It would seem that an item that people were asking about, they would try to stock. Last year I looked at AliExpress (Paul Zhang), and he sells them, but the shipping killed it for the amount I was looking for. I am not in favor of the adapters either. I have several dozen of the pigtails, but I really wasn't looking forward to making my own again. Let me know if you find a source as I may be interested in going in. I am in West Houston.
That's a feature not a bug.
There's no charge for that.
I placed an order for a few things Wen of last week with Paul and received them Yesterday!
Came DHL and yes the shipping was a little high but it came down some when I sent him and email with all the needed items and address.
sunlei_lighting@126.com
If you order during the day, he normally responds the next day.
I use them as well and wish there were more places to source them from as well. I believe wiredwatts sells them. https://www.wiredwatts.com/3-core-15mm-connector
Thanks,
Shawn
Wired Watts has LOR/DIYLEDExpress ended cables. (https://www.wiredwatts.com/wire)
Live, Laugh, Love.
I have considered the auto type plugs before. Did you find a good source for 18ga 3 core wire for the extensions?
Bookmarks