Results 1 to 3 of 3

Thread: Looking for info on Ren24LV

  1. #1
    Join Date
    Dec 2007
    Location
    Colorado Springs
    Posts
    4,051
    Post Thanks / Like

    Default Looking for info on Ren24LV

    This goes back a long way. For those that used to use the Ren24LV, you will recall that an SSR plugged in to the board will not have it's indicator light active. Frank once posted a fix for this that required a jumper wire to be installed. Do any of you old hands remember what the exact fix was? I seem to recall that a ground wire needed to be installed to pin 7 on the output jacks and to the input jack, as the ground was not included on the traces. Anyone?

  2. #2
    Join Date
    Feb 2009
    Location
    Plymouth, MN
    Posts
    9,493
    Post Thanks / Like

    Default Re: Looking for info on Ren24LV

    I thought that was the problem on Budude's Renard48LSD, not Frank's 24LV.

    http://digwdf.org/store/
    Even though the DIGWDF Store has been closed for almost three years, it's still awesome!
    User guides, documentation and other files are still free and available for downloading.

  3. #3
    Join Date
    Dec 2007
    Location
    Colorado Springs
    Posts
    4,051
    Post Thanks / Like

    Default Re: Looking for info on Ren24LV

    Not sure about the LSD, but it is def an issue on the LV....... so, no one remembers this fix?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •