Results 1 to 3 of 3

Thread: Wipe effect on half off my setup

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2017
    Post Thanks / Like

    Default Wipe effect on half off my setup

    I would like some input to how I can do a vertical wipe effect but only on the left or right part of my whole setup.
    Setup.jpg So only the left side of the white light should have the wipe effect.

  2. #2
    Join Date
    Dec 2007
    Lombard, IL
    Post Thanks / Like

    Default Re: Wipe effect on half off my setup

    Create a new group, putting in all the elements you want to have the wipe. Might want to create two groups, right and left.

  3. #3
    Join Date
    Jul 2019
    United Kingdom
    Post Thanks / Like

    Default Re: Wipe effect on half off my setup

    Adding the appropriate groups to do this is a good plan.

    If you wanted the RHS to be 'off' while the wipe is in process you could add an 'intensity' layer to all the nodes in the RHS and set to 0%, that should stop those nodes being included in the wipe. But again, you would need to have the correct groupings in place to allow this. You could then apply the wipe effect to the whole display.

    You can add elements in more than one group BTW, I make extensive use of this myself. So you could have a new group called LHS and paste the references to the existing groups/pixels you want to include in there (select PASTE not PASTE AS NEW)
    Last edited by RichieNorthcott; 01-20-2022 at 10:13 AM.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts